XH200 is two-channel high-output power amp that can be switched between 70 and 100V line operation (200W x 2 channels into 24 ohms 70V/48 ohms 100V). This high-impedance power amp is designed for installations in which multiple speakers are driven in parallel. A high-efficiency switching power supply means that XH200 is significantly smaller and lighter than comparable amplifiers it fits comfortably in 2U rack space and weighs only 10kg. A rear-panel monitor/remote connector allows unit to be controlled or monitored from a remote location. The front panel provides dB-calibrated detented attenuators for each channel, and comprehensive range of protection circuitry and indicators ensures operational stability and safety under the widest possible range of conditions. Euroblock input connectors and barrier-strip output connectors allow simple, secure input and output connection. High pass filters with switchable 40 or 80Hz roll-off provides an extra margin of system flexibility.
Two-channel high-output power amp can be switched between 70 and 100V line operation (200W x 2 channels into 24 ohms 70V/48 ohms 100V)
Designed for installations in which multiple speakers are driven in parallel
High-efficiency switching power supply contributes to compact 2U size and 10kg weight
Rear-panel monitor/remote connector allows unit to be controlled or monitored from remote location
dB-calibrated detented attenuators for each channel
Comprehensive range of protection circuitry and indicators ensures operational stability and safety under widest possible range of conditions
Euroblock input connectors and barrier-strip output connectors allow simple, secure input and output connection
High pass filters with switchable 40 or 80Hz roll-off provides an extra margin of system flexibility
Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier
Spec Sheet available - Yes
Cooling:
single variable-speed fan
Depth:
412 mm
Frequency Response:
maximum 0dB, typical 0dB, minimum -0.5dB, 80Hz to 20kHz (8 ohms, Po=1W, HPF=OFF)
Height:
88 mm
Output Power:
200W x 2, RL=50 ohms (70V line)
Power Requirements:
120V/60Hz, 230V/50Hz, 240V/50Hz
Sensitivity:
4 dB
Total Harmonic Distortion:
less than 0.1% (40Hz to 20kHz, halfpower)
Width:
480 mm
Voltage Gain:
38dB (100V), 35dB (70V)
Front Panel Controls:
power switch (push on/push off), attenuator (31 position) x 2
Intermoduration Distortion:
less than 0.1% (60Hz:7kHz=4:1, halfpower)