Signal Processing Systems : Combiners : Shure Incorporated - PA411

50 Ohms Antenna Combiner

Series: Shure

Model: PA411

Main RF output connector connects to any antenna with a BNC connector
RF LED indicators display signal present and signal overload per input
Power output distributes DC power to PSM transmitters (accessory power cable required)
Features a front panel power switch
Works with PSM®300 Stereo Personal Monitor System

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The Shure PA411 antenna combiner distributes DC power and RF signal for up to four Shure PSM®300 transmitters. The compact half-rack system significantly reduces the number of antennas and power supplies needed when using multiple systems. Distributes DC power and RF signal while reducing rack clutter for up to four PSM®300 systems.

Main RF output connector connects to any antenna with a BNC connector
RF LED indicators display signal present and signal overload per input
Power output distributes DC power to PSM transmitters (accessory power cable required)
Features a front panel power switch
Works with PSM®300 Stereo Personal Monitor System
Features a wideband 470–865 MHz frequency range
Includes PA411, rackmount and hardware kits, 1/4 wave antenna, BNC bulkhead adapter, BNC cable, power supply, power splitter cable and user guide

Combiner Type - Antenna Combiner
Spec Sheet available - Yes

Operating Temperature (Maximum): 63 C
Operating Temperature (Minimum): -18 C
Maximum Frequency Response (Bandwidth): 865000 kHz
Maximum Frequency Response (Bandwidth): 865000000 Hz
Minimum Frequency Response (Bandwidth): 470000 kHz
Minimum Frequency Response (Bandwidth): 470000000 Hz
Impedance: 50 ohm
Depth: 198 mm
Height: 42 mm
Width: 177 mm
Net Weight: 1.62 kg
RF Input:
- Connector Type: BNC
- Maximum Input Level: 20 dBm Per Channel
- Input Port Isolation: 50 dB, typical
- RF Input Power Operating Range (Per Channel): 4.5 to 15 dBm
- LED Indicator Minimum Detection Threshold: 3 dBm ± 1 dB
- RF Overload LED Threshold: 17.5 dBm ± 1 dB
RF Output:
- Output Intercept Point (OIP3): 48 dBm, typical
- Connector Type: BNC
- Reverse Isolation: 40 dB, typical
- Gain (Input to any Output Port): -5 to 0 dB
DC Voltage: 15 Volts
Current Draw: 1.40 Amps

PSM300 - Stereo Personal Monitor System with P3T Half Rack Transmitter, P3R Bodypack Receiver, P3RA Professional Bodypack Receiver

Antenna Combiner 121 kb - Data Sheet

Project List

Antenna Combiner 1425 kb - Other

Project List

Find a Dealer

Find a Distributor

Suggested Products

4-Port 3G-SDI Splitter

by Network Technologies Inc. (NTI)

Datapath’s 4K Quad Splitter

by Datapath Ltd

4K 18Gbps HDMI Quad Screen Splitter/Multiviewer with Built-In USB KVM Switch

by Network Technologies Inc. (NTI)