A95UF is a reversible transformer that matches low-impedance microphones to high-impedance inputs or high-impedance microphones to low-impedance inputs. The transformer permits use of very long microphone cables with either low-impedance or high-impedance microphones. The only requirement is to limit the cable to 4.6m (15ft) between the high-impedance end of the transformer and the low-impedance microphone or microphone input. The transformer prevents high-frequency loss, level loss, and objectionable pickup of noise or hum. A95UF is furnished with a Female XLR professional audio connector on the low-impedance end, and with both a standard 1/4-inch male phone plug and female phone jack adapter for the high-impedance end. Typical applications include connecting a balanced low-impedance microphone to an unbalanced high-impedance input on a mixer or recorder, and connecting a balanced mixer output to an unbalanced high-impedance input on a recorder.
Reversible transformer matches low-impedance microphones to high-impedance inputs
Permits use of very long microphone cables with either low-impedance or high-impedance microphones
Furnished with female XLR professional audio connector
Warranty - Yes
Depth:
89 mm
Warranty (Length/Type):
Limited
Frequency Response:
20Hz to 20kHz, Response at 20Hz no more than 3dB down from flat
Green/Orange winding Low Impedance:
19 to 75 ohms
Green/Yellow winding Low Impedance:
75 to 300 ohms
Black/Red winding High Impedance:
41,000 ohms
Green/Orange winding DC Resistance:
37.5 ohms
Green/Yellow winding DC Resistance:
75 ohms
Black/Red winding DC Resistance:
4300 ohms
Case:
Full magnetic shield, steel with gray enamel finish
Diameter:
19 mm (0.75inch)
55SH SERIES II
- Iconic Unidyne Vocal Microphone with 50Hz to 15kHz frequency Response
565SD-LC
- Classic Unisphere Vocal Microphone with 50Hz to 15kHz Frequency Response