A95U is a reversible transformer that matches low or high-impedance microphones to high or low-impedance inputs. The transformer permits use of very long microphone cables with high-impedance microphones. The cable from the transformer to the low-impedance input can be any desired length. The transformer prevents high-frequency loss, level loss, and pickup of noise and hum. The A95U comes furnished with a Male XLR connector on the low-impedance end, with a 1/4 inch phone plug and phone jack adapter on the high-impedance end.
Matches low or high-impedance microphones to high or low-impedance inputs
Permits use of very long microphone cables with high-impedance microphones
Depth:
89 mm
Frequency Response:
Flat, 20Hz to 20kHz, Response at 20Hz no more than 3dB down from flat
Low Impedance:
75 to 300 ohms (supplied) or 19 to 75 ohms
Medium Impedance:
High (41 kohms with 150 ohms source on 75-to-300 ohms winding)
Dc Resistance Low Impedance:
75 to 300 ohms — 75 ohms, 19 to 75 ohms — 37.5 ohms
DC Resistance- High impedance:
4300 ohms
Case:
Full magnetic shield, steel with gray enamel finish
520DX
- Green Bullet Harmonica Microphone with 100Hz to 5kHz Frequency Response
565SD-LC
- Classic Unisphere Vocal Microphone with 50Hz to 15kHz Frequency Response