Universal studio condenser wired stereo microphone includes dual capsule consisting of two symmetrical push-pull transducers with high linearity. Side fire microphone with the two cardioid pickup patterns of the transducer aligned back-to-back across the axis of the microphone. Signals of both transducers are not combined in the microphone in order to generate differing pickup patterns but are available separately as two channels at the microphone output. Allows the pickup patterns of the MKH 800 TWIN to be remotely adjusted. Signals can be combined in any desired way in the mixing console in order to create all pickup patterns from omnidirectional to figure-8 with an infinite number of intermediate stages. Based on the legendary MKH 800, this microphone opens up to a new dimension of studio recordings.
Remote adjustability
Stable pickup patterns can be set and optimized under monitoring conditions
Wide range of mixes for stereo and surround are possible (including in parallel)
High sensitivity
Very low inherent noise
High linearity transducers
Extended frequency response
Small and slim design
Optionally dark housing design (Nextel)
Polar/Pickup Pattern - Cardiod
Microphone Type - Condenser
Microphone Type - Stereo
Microphone Connectivity - Wired
Maximum Frequency Response (Bandwidth):
50000 Hz
Maximum Frequency Response (Bandwidth):
50 kHz
Minimum Frequency Response (Bandwidth):
30 Hz
Minimum Frequency Response (Bandwidth):
0.03 kHz
Impedance:
100 ohm
Maximum SPL (Sound Pressure Level):
134 dB
Sensitivity:
-28 dBV
Wireless:
No
Product Weight:
0.17 kg
Current Consumption:
2 x 3.1 mA
Equivalent Noise Level:
12 and 20 dB
Minimum Terminating Impedance:
2 Kilo Ohms
Phantom Voltage:
48 +/-4 V
Maximum Output Voltage:
4 V
Minimum Load Impedance:
2 Kilo Ohms
Noise Voltage:
3microAmps (A-weighted) and 8microAmps (CCIR-weighted)
Dynamic Range:
122dB (A-weighted) and 114dB (CCIR-weighted)