Signal Processing Systems : Receivers & Transmitters (Wired) : PureLink - ODA II Tx

ODA II Tx - DVI Fiber Extension System + RS-232 + Stereo Audio

Series: Extension

Model: ODA II Tx

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Purelink’s new ODA II Tx / Rx is a standalone fiber optic signal extension system capable of transmitting DVI/HDMI, 3.5mm Stereo Audio and RS-232 signal over a two strand fiber-optic cable. In addition, the fiber type can be either single mode or multimode. There is a distinctive difference in the distance depending upon the type of fiber cable that is being used. A multimode cable can extend up to 500m at WUXGA/ 1080p@60Hz, but the distance significantly increases when using a single mode fiber which can extend up to 2000m at WUXGA / 1080p@60Hz. By having a flexible fiber solution, PureLink's ODA II provides a convenient and affordable solution for transmitting highest quality video and audio signal in various applications.

Warranty - Yes
Wireless - Yes

Fiber optical cabling between transmitter and Receiver:
Type / Number of fiber: 2 Strand fiber optic cable, 50/125 µm or 62.5/125 µm multimode & singlemode
Connector: 2 Female LC connectors
Operating distance: Up to 6,600 ft ( 2000m ) singlemode / up to 1,650 ft ( 500m ) multimode
(NOTE: Operating distance is approximate. This is a typical distance. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, bandwidth, connector splicing, losss, bend radius and environmental factors.)
Nominal peak wavelength: 850 nm (Multimode) 1310nm (Singlemode)
Transmission power: Singlemode - -5 dBm, typical; Multimode - -5 dBM, typical
Maximum receiver sensitivity: Singlemode - -17 dBm, typical; Multimode - -11 dBm, typical
Optical loss budget: Singlemode - 12 dB, Max; Multimode - 8 dB, Max
Video:
Maximum Channel Data Rate: 1.65 Gbps per color
Pixel clock: 165 MHzz
Supported resolution: Up to 1920 x 1200 / 1080p @ 60Hz single link (up to 6,600ft) Singlemode; Up to 1920 x 1200 / 1080p @ 60Hz single link (up to 1,650ft) Multimode
Formats: RGB & YCbCr digital
Standard: DVI 1.0, HDMI 1.3
HDCP support: Yes
Audio:
Connector: 3.5mm Mini Jack Stereo Audio
Gain: Unbalanced output: 0 dB, Balanced output +5 dB
Frequency response: 20Hz, ±0.05dB
Impedance: >10K ohms(input) 50ohms (unbalanced output) 100 ohms (balanced output)
Nominal level: -9dBV
Maximum level: +6 dBV (Unbalanced, input), > ±16 dBu (balanced output)
Video connector - Transmitter & Receiver:
Signal Type: Single link DVI-D
Connector: Female DVI-D
Control - external device (Pass-thru, bidirectional):
Serial control port/Transmitter: 3 Female Phoenix connector, (Tx, Ground, Rx)
Receiver: 3 Female Phoenix connector, (Tx, Ground, Rx)
Baud rates: Support up to 115200
General Information:
Power supply: Ext. adapter - Input: 100-240 VAC, 50-60 Hz, Output: 12VDC, 3A, 13 watts(max)
(NOTE: Both transmitter and receiver extender need to be powered locally by provided external power supply adapter.)
Power consumption: Transmitter - 7 watts; Receiver - 7 watts
Cooling: Convection
Mounting: Mounting ears for ceiling and behind the monitor
(NOTE: All nominal levels are at ± 9%)
(NOTE: Specifications are subject to change with or without notice.)
Depth: 78.74 mm
Height: 40.64 mm
Width: 109.22 mm
Product Weight: 0.41 kg

DOF4 Tx - DVI to 4LC Fiber Extender - Transmitter

HOF 2.0 Rx - 4K HDMI 2.0 over 1LC Fiber Extender Receiver

HOF 2.0 Tx - 4K HDMI 2.0 over 1LC Fiber Extender Transmitter

OLC II Tx - DVI to 2 LC Fiber Transmitter

OLC III Rx - DVI over 1LC Fiber Extender - Receiver

OLC III Tx - DVI over 1LC Fiber Extender - Transmitter

OLC Rx - DVI to 4 LC Fiber Reciever

ODA II Manual.pdf 673 kb - Instructions

Project List

Suggested Products

SDVoE Compatible HDMI 2.0 over Fiber Optical Link Transmitter

by Lightware

SDVoE Compatible HDMI 2.0 Over Fiber Optical Link Receiver

by Lightware

USB Type-C and HDMI Switcher Transmitter

by Lightware