Speakers : Loudspeakers : Martin Audio Ltd - W8LMD

Three-Way Mini, Vertically Arrayable Enclosure

Series: Wavefront

Model: W8LMD

Stand alone vertically arrayable enclosure
Line array downfill element
Consistent 120º (-6dB) horizontal mid and HF pattern control
20º (-6dB) vertical dispersion
Tripod mountable singularly or in pairs

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Martin Audio W8LMD is a mini, wide-dispersion vertically arrayable enclosure. It can be used individually and in small quantities for short to medium throw applications (up to 30 metres) as well as a downfill element for the W8LM. Its 20 degree vertical dispersion requires fewer cabinets to cover the same area as a conventional line array element, yet it still benefits from the smooth, predictable coverage of a vertically coupled system.

Stand alone vertically arrayable enclosure
Line array downfill element
Consistent 120º (-6dB) horizontal mid and HF pattern control
20º (-6dB) vertical dispersion
Tripod mountable singularly or in pairs
Amplitude shading switch
Passive or Bi-Amp format
Compatible with WMX, WLX, WSX, WS2A & S218 sub-basses
Application includes: Short to medium throw arrays of 1 to 4 cabinets, Vertically arrayed downfill for W8LM systems, Theatre sound reinforcement, Corporate events and Fixed installations

Loudspeaker Mount Type - Flown
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 18 kHz
Maximum Frequency Response (Bandwidth): 18000 Hz
Minimum Frequency Response (Bandwidth): 60 Hz
Minimum Frequency Response (Bandwidth): 0.06 kHz
Depth: 401.32 mm
Height: 284.48 mm
Width: 619.76 mm
Product Weight: 29.94 kg
Impedance: 12 ohm
Type: Three-way, mini vertically arrayable enclosure
Drivers LF + MF Section: 8 inch (200mm)/2 inch (50mm) voice coil, reflex-loaded direct radiator 8 inch (200mm)/2 inch (50mm) voice coil, neodymium driver, front horn loaded, rear reflex loaded
Drivers HF Section: 2 x 1 inch (25mm) exit HF compression drivers, horn loaded
Rated power: LF + MF: 400W AES, 1600W peak; HF: 75W AES, 300W peak; Passive: 400W AES, 1600W peak
Frequency Response: LF + MF: 99dB; HF: 104dB; Passive: 98dB rising to 103dB at HF
Maximum SPL: LF + MF: 124dB continuous, 130dB peak; HF: 123dB continuous, 129dB peak; Passive: 123dB continuous, 129dB peak (calculated @ Im)
Dispersion (-6dB): 120º horizontal (down to 750Hz), 20º vertical, 140º horizontal (down to 650Hz) @ -10dB
Crossover: 300Hz passive, 2.2kHz active or passive, Shading control switch – rear mounted
Enclosure: Vertical trapezoid with 10º wall angle, multi-laminate birch ply construction
Finish: Textured paint
Protective Grille: Perforated steel
Connectors: 2 x Neutrik NL4
Fittings: Proprietary rigging system, 2 x pocket handles each side 4 x M8 inserts for externally mounted top hat fitting

Specification Sheet for Three-Way Mini, Vertically Arrayable Enclosure 62 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

Saros 6" Very Low Profile 2-Way In-Ceiling Speaker, White Textured, Single

by Crestron Electronics, Inc.

Saros 6" Ultra Low Profile 2-Way In-Ceiling Speaker, White Textured, Single

by Crestron Electronics, Inc.

15-inch Single Two-way 90° x 60° Full-range Loudspeaker System, White Finish

by Electro-Voice