A&E SPECIFICATIONS: The EIA/TIA/RoHS compliant floor rack shall be Lowell Model No. LSER-4427. Overall measurements shall be 83.125"H x 27"D x 23.06"W with panel space of 44 rack units. Load capacity shall be 3150 lbs. The rack shall include a recessed rear door with vents and key lock, welded side panels with vents, top with 7U opening and combination knockouts, open base with grounding stud and corner weldments, one pair adjustable front mounting rails with printed RU increments, combination knockout panels above rear door, blank panels below rear door, and provisions to mount an optional surface-mount front door or rear rails (ordered separately). The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black wrinkle powder epoxy finish. It shall be UL Listed to UL2416 and shall meet or exceed requirements for Category 1 (Anchorage) and Category 2 (Anchorage & Rack) as specified in International Building Code (IBC, 2009, section 1613), California Building Code (CBC, 2007, section 1613), and California Office of Statewide Health Planning and Development (OSHPD). The rack shall include P.E. certified documentation.
- Configurable top with 7U opening for 19 in. panels (solid closure panels included)
- Open base with corner weldments
- Open front (optional door)
- Recessed rear door with vents and key lock
- One-pair fully adjustable rails tapped 10-32 (printed RU scale)
- Cable Management: Multiple lacing points, knockout panels
- Pilot Point screws with captive washers
- Grounding stud
- Threaded inserts (for optional leg levelers)
- Beveled corners
- Black wrinkle powder epoxy finish
- Load capacity 3150 lbs.
- Includes P.E. Certified documentation
- SPECIFICATIONS:
- Rack Space: 44U
- Overall Height: 83.125 in.
- Overall Width: 23.06 in.
- Overall Depth: 27.00 in.
- Useable Depth: 24.34 in.
- COMPLIANCE & CERTIFICATION
- EIA/TIA compliant
- UL 2416 Listed
- RoHS compliant
- Certified U.S. steel
- Made in Missouri, U.S.A.
- P.E. Certified (Seismic Sec. 1613 - 2009 IBC, 2010 CBC; OSHPD)
