Signal Processing Systems : Receivers & Transmitters (Wired) : Listen Technologies Corp. - LT-800-216-01

Stationary RF Transmitter (216 MHz)

Series: FM

Model: LT-800-216-01

Highlights
Superior Audio Quality
Long transmission range
Designed for installation
Advanced audio processing

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Thanks to its outstanding audio quality, the Listen LT-800 Stationary Transmitter can be used in a variety of applications. The LT-800 is connected to your main audio system, broadcasting a high quality audio signal to belt pack receivers, stationary receivers, or wireless speaker / receivers. The end result - your audience can hear and understand the presentation better because of improved speaker placement or because they have their own belt pack and headset. The signature Look & Listen LCD shows channel, lock, programming and RF power.

Includes

LT-800 Stationary Transmitter
LA-207 12 VDC Replacement Power Supply for LT-800
Quick reference card

Highlights
Superior Audio Quality
Long transmission range
Designed for installation
Advanced audio processing
Limited Lifetime Warranty

Wireless Receiver Transmission - RF
Wireless - Yes
Spec Sheet available - Yes

RF Frequency Range 216MHz: 216.0125 - 2169875 MHz
Number of Channels: 57
Frequency Accuracy: ± .005 % stability 0 to 50 degrees C (32 to 122 degrees F)
Transmitter Stability: 50 ppm
Transmitter Range 216MHz: 3,000(914) feet (m)
Output Power 216MHz: 100 mW max allowed by FCC
Antenna: Several available. See www.ListenTech.com for details
Antenna Connector: Reverse BNC
Compliance: FCC Part 90, Industry Canada
System Frequency Response 216MHz: 50 - 10 kHz (±3dB). All system specifications are end-to-end .
System Signal to Noise Ratio 216MHz: 80 dB SQ enabled, A-weighted. SQ disabled: 50dB in 216MHz. All system specifications are end-to-end .
System Distortion: <2 % Total harmonic distortion (THD) at 80% deviation. All system specifications are end-to-end
Audio Input 1 Connector: Rear panel. Female–XLR and ¼ in combo connector, balanced.
Audio Input 1 Nominal Input Level: -55/0 dBu Rear panel. Female–XLR and ¼ in combo connector, balanced, -55/0dBu (mic/line) nominal input level adjustable, -30/+21dBu (mic/line) maximum, impedance 1k/20k Ohms (line/mic)
Audio Input 1 Maximum Input Level: -30/+21 dBu Mic/line, adjustable
Audio Input 1 Impedance: 1/20 k ohms Line/mic
Audio Input 2 Connector: Rear panel. One Phono connector, unbalanced.
Audio Input 2 Nominal Input Level: 10/+10 dBu Line/speaker, adjustable
Audio Input 2 Maximum Input Level: 30 dBu
Audio Input 2 Impedance: 100 k ohms
Combined Audio Output (Mix) Connector: Rear panel. One Phono connector, unbalanced.
Combined Audio Output (Mix) Nominal Input Level: 0 dBu
Combined Audio Output (Mix) Maximum Input Level: +19 dBu
Combined Audio Output (Mix) Impedance Level: 10 ohms
Headphone Output Connector: Front panel. One 3.5mm connector.
Headphone Output Maximum Output Level: +14 / 250 dBU / mW Unbalanced, adjustable output level.
Headphone Output Impedance: 32 ohms
RF Power Selection: Rear panel. Full, ½, ¼ (see "Output Power" above).
Set-up Controls: Front Panel. Input level, mix level (modulation), contour equalization
User Controls: RF power, test tone, channel UP and DOWN, Input 1: line or mic level, Input 2: speaker or line level.
Programming: Channel selection can be locked by holding the UP and DOWN button 5 seconds.
Input VU Meter: Dual Ten step LED (eight green, two red)
Mix VU Meter: Ten step LED (eight green, two red)
RF Power: Four step green LED
Power: Green LED illuminates when the unit is powered up
LCD Display: Channel and lock status
Test Tone: Red LED illuminates when test tone enabled
Power Supply Type: In-line power supply, Listen part number LA-201
Power Supply Input: 120 / 60 / 19 VAC / Hz / Watts Maximum continuous
Power Supply Output: 15 / 1 VAC / A
Power supply connector: .02 x .01 (5.0 x 2.5) in (mm) OD x ID, barrel type
Compliance: UL Listed
Dimensions: 8.0 x 8.0 x 7.75 (20.3 x 20.0 x 4.45) in (cm) Width by depth by height
Unit Weight: 3.0 (1.4) lbs (kg)
Unit Weight with LA-201 Power Supply: 4.4 (2.0) lbs (kg)
Shipping Weight: 5.0 (2.3) lbs (kg)
Rack Mounting: 1/2 rack unit (RU) Rack mounting kit available (LA-326)
Temperature - Operation: -10 to 40 (14 to 104) degrees C (degrees F)
Temperature - Storage: -20 to 50 (-4 to 122)
Humidity: 0 to 95 % Relative humidity, non-condensing

LT-800 Stationary FM Transmitter Data Sheet 1139 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

USB Type-C and HDMI Switcher Transmitter

by Lightware

SDVoE Compatible HDMI 2.0 over Fiber Optical Link Transmitter

by Lightware

SDVoE Compatible HDMI 2.0 Transmitter

by Lightware