Provide eight complete channels of either compression or gating, with push button selection.LED status indication of operational mode on an individual channel basis, compressor section on each channel shall provide for adjustment of threshold, make-up gain, attack and release times and ratio, RMS or Vintage emulation (peak) response and push button selection of soft or hard knee mode on each channel, gate section on each channel shall provide for adjustment of threshold, attack, hold and release times and range. Each channel shall have a six-segment input level meter and ten-segment attenuation depth meter, which will show the gain reduction being applied in both compression and gating modes. Each channel shall have a sidechain band-pass filter with rotary control knob for frequency control and shall be enabled by push button switch.
- Provide eight complete channels of either compression or gating, with push button selection
- LED status indication of operational mode on an individual channel basis
- Compressor section on each channel shall provide for adjustment of threshold, make-up gain, attack and release times and ratio
- RMS or Vintage emulation (peak) response and push button selection of soft or hard knee mode on each channel
- Gate section on each channel shall provide for adjustment of threshold, attack, hold and release times and range
- Each channel shall have a six-segment input level meter and ten-segment attenuation depth meter, which will show the gain reduction being applied in both compression and gating modes
- Each channel shall have a sidechain band-pass filter with rotary control knob for frequency control and shall be enabled by push button switch
- Band-pass filter shall have two different bandwidth settings, selectable by a push button switch
- There shall be provision for an external sidechain input selected by the external key switch with LED status indication
- Bypass switch shall set the signal path to unity gain on each channel and provide LED status
- Each channel shall have solo switch with LED status indication that sends sidechain signal to solo bus output connector
- Solo bus input connector shall allow multiple dynamics units to be chained together to form a common solo bus output
