Tabletop control panel mounts in waveform/vector rack or sits on desktop. It offer remote control capability of any size network of Avenue frames through a touch screen interface. Any number of 1RU and 3RU frames can be connected together through the AveNet intraframe LAN bus to create an Avenue network. These networks can then communicate over Ethernet using the AveNet over IP feature (AVIP). The frames can be controlled by a single touch screen or any number of touch screens installed in the network. Remote control of Avenue frames is provided through a series of on-screen menus for system configuration and for setting parameters for each module installed in the frames. The menus can be utilized to name frames, modules, groups of frames, set IP, AveNet and AVIP addressing and to configure module parameters. The Avenue touch screen front door option is installed in the front of the 3RU frame door. A single front door option can control an entire network or front doors can be installed in various frames for access from other rooms or locations. The tabletop touch screen control panel offers intuitive remote control capability with both touch screen and dedicated knobs. Couple the full proc controls in the Avenue conversion modules with the 6 rotary controls to create a perfect QC station for live shading and live adjustments. The small size is great for satellite receiving areas, QC and edit suites. Two configurations are possible, free standing tabletop or mounted directly into a standard 3RU half frame of a waveform monitor. The same networking capability and menus of the touch screen are available with the tabletop model in addition to six rotary shaft encoder knobs to provide convenient adjustment of module parameters. The Avenue touch screens provide a series of menu displays to allow to set AveNet and IP addresses, enable AveNet Over IP (AVIP), name and monitor modules, frames and groups of frames and set module parameters in the system.