The BMA CTH Beamforming Microphone Array Ceiling Tile with built-in AEC provides the same impeccable room coverage as the BMA CT using adaptive steering (think of it as smart switching).
24 MICROPHONES
Number of Beams: Two patterns, either 5 or 6 beams
Polar/Pickup Pattern - Other
Microphone Type - Boundary
Spec Sheet available - Yes
LED:
4 LED indicators on one end of unit: Mute/Un-mute configuration with 8 color options, two blink patterns and warning indications
Configuration & Administration Software:
CONSOLE® AI Software
Mounting:
Ceiling mount (24" or 600mm drop-ceiling grid)
Minimum Frequency Response (Bandwidth):
150 Hz
Minimum Frequency Response (Bandwidth):
0.15 kHz
Maximum Frequency Response (Bandwidth):
16000 Hz
Maximum Frequency Response (Bandwidth):
16 kHz
Operating Temperature (Maximum):
40 C
Operating Temperature (Minimum):
-10 C
POWER & THERMAL:
Power Type: PoE Port Type: RJ-45 Power Source: PoE Injector or equivalent PoE: IEEE 802.3at compliant devices providing 56V and 640 mA (36 W). P-Link In - Mode B PoE In - Mode A and Mode B *BMA CTH requires its own PoE (IEEE 802.3 at compliant) if 2x10W speakers are driven Power Consumption: 100-240VAC, 50/60Hz 9.1 Watt typical without speaker amp 38W at max power 1kHz (2 x 10W) Thermal: 130 BTU/Hr at max power
24 MICROPHONES:
Number of Beams: Two patterns, either 5 or 6 beams Polar Pattern: Custom Frequency Response: 150Hz – 16kHz, +/- 3dB Dynamic Range: 150Hz – 16kHz, > 70dB
PEQ:
Automatic Level Control (ALC) on/off Gain adjust Mute on/off Auto gate/Manual gate
P-LINK PERIPHERAL BUS:
Ports labeled as "Expander" on Huddle Chassis, and "P-Link" on BMA CTH P-Link In & Out: Proprietary Network Ports Type: RJ-45 Cable: RJ45 Cat5e, Cat6, Expandable Distance: Up to 200 ft.
POWER SELECTION SWITCH:
Type: Slide Switch Slide toward P-Link to power device by P-Link Slide toward PoE to power device by PoE Injector
Configuration:
Beam enable/disable Acoustic Echo Cancellation (AEC) on/off Noise Cancellation (NC) on/off Filters: All Pass Low Pass High Pass Notch