A low-cost, single-channel extender for sending VGA signals over CAT5/5e/6 UTP links.
Say good-bye to bulky, expensive, and difficult-to-terminate VGA cable. The Mini CAT5 VGA Extender enables you to use ordinary CAT5/5e/6 UTP cable to connect a video monitor up to 500 feet (152.4 m) from your PC or video source.
The kit has low-cost, single-channel extenders for sending video signals over CAT5 UTP links. With it, you get a single-channel transmitter and a receiver unit, which work together to extend video signals up to 500 feet (152.4 m) over standard CAT5/5e/6 cable.
The transmitter-extender combo only requires a single power supply, which can be plugged in at either end of the link - whichever side is most convenient for you.
The VGA kit converts a PC's VGA signal into a format that can be transmitted over the CAT5 link, then converts it back to VGA for connection to your monitor, projector, or another display device.
The transmitter in the kit amplifies the signal for clean and crisp transmission, and differential signaling eliminates ground loops and noise. In the transmission, there's little or no degradation of video quality, and the extender handles resolutions up to 1600 x 1200 at any refresh rate, working with VGA, SVGA, XGA, and UXGA video.
You can also transport them and install them with ease. Rugged and reliable, the extender units feature a compact plastic enclosure that can withstand the daily grind and frequent cable changes.
