Audio Production Equipment : Audio Mixers / Consoles : RDL, Radio Design Labs - ST-MX3

3 Line Input Mixer - Line Out

Series:

Model: ST-MX3

Mix Line-Level Signals
Three Individually Adjustable Inputs
Add Additional Line Level Inputs to an Existing Mixer
Combine Signals of Different Level, Impedance or Balanced /Unbalanced Configuration
Isolation Between Input Signals

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

Videos

The ST-MX3 is a line-level mixer module in the STICK-ON Series of products. It provides audio mixing of three line-level inputs with individual input gain adjustments. The line-level output is capable of driving either high or low impedance, balanced or unbalanced loads.The ST-MX3 operates from floating or bipolar dc power.For installations with microphone level inputs, use the ST-UMX3 Universal Audio Mixer.

Mix Line-Level Signals
Three Individually Adjustable Inputs
Add Additional Line Level Inputs to an Existing Mixer
Combine Signals of Different Level, Impedance or Balanced /Unbalanced Configuration
Isolation Between Input Signals
Low-Noise and Low-Distortion Performance
RDL® SupplyFlex™ Power Input Configuration

Noise: < -80 dB (all inputs @ 10 dB gain, referenced to +4 dBu)
Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): 0 C
Number of Audio Inputs (Analog): 2
Number of Audio Outputs (Analog): 1
Total Harmonic Distortion + Noise (THD+N): 0.03 %
Inputs (3): 30 K ohm balanced or unbalanced bridging
Input Level: -20 to +18 dBu (for +4 dBu output)
-24 dBu to +14 dBu (for 0 dBu output)
Outputs: 400 ohm to drive low or high impedance balanced or unbalanced lines
Output Level: +4 dBu nominal, (adjustable; unbalanced output 6 dB below balanced line level)
THD+N: < 0.03 % (10 Hz to 20 kHz)
Frequency Response: 10 to 20000 Hz (+/- 0.5 dB)
Headroom: 18 dB
Gain (each input): -14 to +24 dB (adjustable)
CMRR: > 50 dB (50 to 120 Hz)
Power Requirement: 24 to 33 Vdc @ 55 mA

RU-MX5ML - 5 Channel Mic/Line Audio Mixer with Phantom Power

ST-MX2 - 2 Mic or Line Input Mixer - Mic and Line Out

STS-RF1 - Shielded Chassis for STICK-ON Module

Line Level Mixer 452 kb - Other

Project List

DRA-35S
STICK-ON DIN Rail Adapter

DRA-35S6
STICK-ON DIN Rail Adapter

DTB
STICK-ON® Series Detachable Terminal Block

MB-1
Mounting Kit - RU, ST and TX Series

MB-3
Kit to Mount ST, TX Series Modules on FP Panel

MSR-1
Snap Rail Adapter - STICK-ON Series

SMK-12
STICK-ON Mounting Plate

SR-10
STICK-ON Series Mounting Rack - 10 Modules

SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

SR-4
STICK-ON Series Mounting Rack - 7 Modules max.

STR-19A
STICK-ON Series Racking System - 12 Modules

STR-19B
Hinged 19-inch Rack Mount Panel

RDL ST-MX3 3 Channel Audio Mixer - Line input and output

Project List

Find a Dealer

Find a Distributor