Cables & Connectors : Cable Tools & Testers : Platinum Tools - TLA300-1

Tel Scope Telco Line Analyzer with Angled Bed of Nails, Piercing Clip Cord Set and RJ Plug

Model: TLA300-1

Large backlit display for low light environments
Glow-in-the-dark keypad
Advanced data detection & identification
100% Data Safe
Rugged weatherproof case, IP54 Standard

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The TelScope is the first true 21st century telecommunication line analyzer setting a new standard for POTS butt sets. It is a field instrument that delivers more information of online conditions and status than any other test set on the market, anywhere in the world.

Large backlit display for low light environments
Glow-in-the-dark keypad
Advanced data detection & identification
100% Data Safe
Rugged weatherproof case, IP54 Standard
Drop Proof (Tested at 20ft)
60-in cord set with Alligator Clips, Angled Bed-of-Nails, Piercing Point and No-Fault RJ12 8P8C connector
Speaker with fine volume adjustment
Noise cancelling microphone
Microphone mute with toggle on/off locking feature
Soft key menu system
Metal spring-loaded belt clip
Cushion boot for extra protection
Off-hook current and polarity
On-hook voltage and polarity
On-hook and call waiting Caller ID info
Amplified Line Monitor for volume levels comparable to
8 number Stored memory with Alpha/Numeric tags
Fuel Gauge Battery condition
Continuous Polarity Indication
Caller ID/Call Waiting and Caller ID error detection
Tone and Pulse dialing
Configurable Auto Off in all modes
Detects and identifies DSL and T1 lines
Last number dialed, redialed or received
Multilingual (English, French, Spanish)
Backlight 0-100% adjustable with on/off option

Tool or Tester Type - Tester
Warranty - Yes
Spec Sheet available - Yes

Depth: 50.80 mm
Height: 209.55 mm
Width: 63.50 mm
Product Weight: 0.56 kg
Warranty (Length/Type): 1 Year
Interface: Attached cord set
Languages: English, Spanish and French
Ringer Equivalence: In BELL mode: 0.0 (no ringer load)
Pulse Dialing: Pulse rate: 10 pps +/- 10%; Make/break ratio: 60% to 40% +/-2%; USA, Interdigit interval: 820 ms; Resistance during break: 120K Ohms minimum
Tone Dialing: DTMF output (into 600 Ohms): Tone-frequency error: +/-1.5%; Tone Level: High group: -6 +/-2 dBm; Low group: -8 +/-2 dBm; High group vs. Low group Difference (twist): 2 +/-1 dBm
Flash Duration: 600 +/-50 ms
Pause Duration: Tone: 3 seconds; Pulse: 3.4 seconds
Memory: 8 programmable locations, 32 digits with 12 character tag, stored in nonvolatile memory. Last number redial plus list of last 10 numbers dialed
Return Loss: Minimum 14 dB at 600 Ohms
Line-Current Range: 10 to 110 mA
Apparent Line Resistance: 275 Ohms at 20 mA
Monitor Mode Impedance: DC: 1MOHMS typical, AC: 390 KOHMS at 1 KHz typical
Measurement: Voltage: 0 to 200 VDC +/-5%; Current: 10 to 110 mA +/-5%
User Controls: (1) Left-side-mounted TALK/BELL/MON push button switches for operating modes; (1) Right-side-mounted microphone mute pushbutton; (4) Front-mounted pushbuttons for various options; (1) Standard front-mounted 12-key phone keypad
Display: Transflective 128 by 64 pixel graphical liquid crystal display (LCD) with LED backlight
Power: 4 x AAA alkaline batteries
Battery Life: Operation: 7 hours min. 150 hours maximum, Standby: 2 years

TelScope Test Set 241701 kb - Data Sheet

Project List

Suggested Products

Cleerline SSF™ Keystone Insert Duplex LC to LC Multimode Light Almond

by Cleerline Technology Group

Termination Tool for DM-CONN-ULTRA-PLUG-20

by Crestron Electronics, Inc.

Cleerline SSF™ Fiber Cleaning Swabs 1.25mm

by Cleerline Technology Group