Rackmount Sequencer w/pass-through jacks

Model: SEQR-P4

Quick "pass-through" connections with two RJ45 jacks
Because the step assignment is actually selected on the connected devices (RPC-P Series remote power controls or RY-P Series relays), the startup sequence can be quickly changed without the need to re-wire.
Four delayed closure circuits activate in sequential order (1, 2, 3, 4) and deactivate in reverse order (4, 3, 2,1). Delay between steps is easily adjusted with DIP switch.
Sequencing is initiated via rocker switch on front panel. Remote switches can also be added (see spec sheet).
19" x 9" x 1U chassis

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

This low voltage rackmount power sequencer with pass-through RJ45 jacks for quick connections works with compatible remote power controls (RPC-P Series) and relays (RY-P Series) to provide time-delayed activation and deactivation of AC powered equipment at remote locations.

Quick "pass-through" connections with two RJ45 jacks
Because the step assignment is actually selected on the connected devices (RPC-P Series remote power controls or RY-P Series relays), the startup sequence can be quickly changed without the need to re-wire.
Four delayed closure circuits activate in sequential order (1, 2, 3, 4) and deactivate in reverse order (4, 3, 2,1). Delay between steps is easily adjusted with DIP switch.
Sequencing is initiated via rocker switch on front panel. Remote switches can also be added (see spec sheet).
19" x 9" x 1U chassis
LED status indicators
UL Listed power supply with input 100-240VAC, output 24VDC, 500mA, 6 ft. cable with several plug adaptors.