Signal Processing Systems : Related Signal Processing Products : LSC Lighting Systems - UDM12/16

12-channel Unity 16A Dimmer/TruPower/Switching Module

Model: UDM12/16

18cm active TFT colour display with inbuilt touchscreen
Real-time display of RMS voltage and currents on all 3-phases + neutral in unity modular enclosure
Configurable warning alarms for over-current, over- or under-voltage, temperature alarms, tripped breakers, phase loss and control signal loss
Configuration and control of all UDM, USM and ULM modules in the cabinet
RDM (remote device management) ability to remotely monitor and control rack cabinet as a whole

More Product Information Below

Compare

Project List

Product Info

Documents

The UNITY Control Module (UCM) with an 18cm capacitive colour touchscreen has a simple user interface, similar in operation to most smart phones for system configuration. The UCM will also display the current system status and report any fault conditions. The UCM is designed to configure and control UNITY dimmers, switch modules or LED dimmers housed within a UNITY Installation Rack and to act as a control and reporting proxy to the outside world.

18cm active TFT colour display with inbuilt touchscreen
Real-time display of RMS voltage and currents on all 3-phases + neutral in unity modular enclosure
Configurable warning alarms for over-current, over- or under-voltage, temperature alarms, tripped breakers, phase loss and control signal loss
Configuration and control of all UDM, USM and ULM modules in the cabinet
RDM (remote device management) ability to remotely monitor and control rack cabinet as a whole
Push-button switch located above each breaker on the modules can be pushed to immediately bring the configuration for that channel onto the UCM’s display
Relevant information can be reported to a central controller either via RDM or via LSC’s HOUSTON II reporting system
UDM, USM and ULM modules are detected and automatically reconfigured
Ability to select control inputs from Art-Net, sACN or dual DMX512-A
Softpatch of incoming control signals to all dimmer and switch channels
Ability to save configuration off-site
Automatic reconfiguration of replaced modules
Software update function via USB to all internal modules ensuring that all modules are running the same software
Integrates with UNITY UDM, USM and ULMs for seamless control of all parameters
System can be configured so that modules operate even if the UCM fails