The GenVI new intelligent dimming and power distribution unit represents the sixth generation of dimmers designed by LSC. GenVI advanced dimming system allows you to configure any of its outputs in any combination, to be an 8-bit or 16-bit dimmer or a direct power relay channel using TruPower. This enables GenVI to dim traditional lamps or power moving lights, LED fixtures, video screens or audio power amplifiers in fact anything where controlled power distribution is needed. The colour touchscreen offers the user the ability to set each channel individually, control the outputs locally and view any external fault conditions that may be present. As well as having local and DMX control, GenVI is also RDM (remote device management) enabled, allowing the user to change the DMX address of the unit, and view any fault conditions including over-temperature and loss of phase or DMX signal from any RDM controller. Optional Neutral disconnect MCBs can be provided where RCDs are not desirable. The GenVI advanced dimmer system offers a sophisticated riggers' control that can replay scenes or chases, each of which can be individually programmed in addition to a DMX loss scene that can be activated as an emergency back up on loss of a DMX signal. This emergency backup scene can be programmed via the front panel controls or via a snapshot of the DMX input signal.