PRO AV CATALOG
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2-Channel Gate Receiver
Model: GRD2
Part #: DNR00102
- Auto voltage sensing - no jumpers to set
- Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
- Supplied with whip antenna, three feet of coaxial cable, and bulkhead connector
- Power: 12 - 30 VAC or 10.5 - 30 VDC
- Codes: 128 (set by dip switches)
Product Info
Tech Specs
Documents
The GRD-2 is a 2-channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The GRD-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the Delta-3 radio format, with 256 possible codes for each channel, set by dipswitch.
- Auto voltage sensing - no jumpers to set
- Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
- Supplied with whip antenna, three feet of coaxial cable, and bulkhead connector
- Power: 12 - 30 VAC or 10.5 - 30 VDC
- Codes: 128 (set by dip switches)
- RF frequency: 310 MHz
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 140 F
- Operating Temperature (Minimum): -4 F
- Impedance: 75 ohm
- Depth: 1.50 in
- Height: 5.25 in
- Width: 3.63 in
Receiver
36115 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Advanced Sound & Communication
close
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com
Contact in regards to this product:
Linear
Model: GRD2
For US/Canada Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you