Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
High Impedance Distribution Power Amplifier
Model: XH200
- Two-channel high-output power amp can be switched between 70 and 100V line operation (200W x 2 channels into 24 ohms 70V/48 ohms 100V)
- Designed for installations in which multiple speakers are driven in parallel
- High-efficiency switching power supply contributes to compact 2U size and 10kg weight
- Rear-panel monitor/remote connector allows unit to be controlled or monitored from remote location
- dB-calibrated detented attenuators for each channel
Product Info
Tech Specs
Documents
XH200 is two-channel high-output power amp that can be switched between 70 and 100V line operation (200W x 2 channels into 24 ohms 70V/48 ohms 100V). This high-impedance power amp is designed for installations in which multiple speakers are driven in parallel. A high-efficiency switching power supply means that XH200 is significantly smaller and lighter than comparable amplifiers it fits comfortably in 2U rack space and weighs only 10kg. A rear-panel monitor/remote connector allows unit to be controlled or monitored from a remote location. The front panel provides dB-calibrated detented attenuators for each channel, and comprehensive range of protection circuitry and indicators ensures operational stability and safety under the widest possible range of conditions. Euroblock input connectors and barrier-strip output connectors allow simple, secure input and output connection. High pass filters with switchable 40 or 80Hz roll-off provides an extra margin of system flexibility.
- Two-channel high-output power amp can be switched between 70 and 100V line operation (200W x 2 channels into 24 ohms 70V/48 ohms 100V)
- Designed for installations in which multiple speakers are driven in parallel
- High-efficiency switching power supply contributes to compact 2U size and 10kg weight
- Rear-panel monitor/remote connector allows unit to be controlled or monitored from remote location
- dB-calibrated detented attenuators for each channel
- Comprehensive range of protection circuitry and indicators ensures operational stability and safety under widest possible range of conditions
- Euroblock input connectors and barrier-strip output connectors allow simple, secure input and output connection
- High pass filters with switchable 40 or 80Hz roll-off provides an extra margin of system flexibility
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- Spec Sheet available - Yes
- Cooling: single variable-speed fan
- Depth: 412 mm
- Frequency Response: maximum 0dB, typical 0dB, minimum -0.5dB, 80Hz to 20kHz (8 ohms, Po=1W, HPF=OFF)
- Height: 88 mm
- Output Power: 200W x 2, RL=50 ohms (70V line)
- Power Requirements: 120V/60Hz, 230V/50Hz, 240V/50Hz
- Sensitivity: 4 dB
- Total Harmonic Distortion: less than 0.1% (40Hz to 20kHz, halfpower)
- Width: 480 mm
- Voltage Gain: 38dB (100V), 35dB (70V)
- Front Panel Controls: power switch (push on/push off), attenuator (31 position) x 2
- Intermoduration Distortion: less than 0.1% (60Hz:7kHz=4:1, halfpower)
- Maximum Input Voltage: +22 dBu
- Standby Power Consumption: 5 W
- Unbalanced Input Impedance: 10 kiloohms
- Balanced Input Impedance: 20 kiloohms
- Product Weight: 9.80 kg
- Signal to Noise Ratio: 103 dB
- Idle power consumption: 40 W
Distribution Power Amplifier
184 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Yamaha Commercial Audio Systems, Inc.
Model: XH200
Request more information from a dealer near you
close