Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Network Hub/Bridge
Model: NHB32-C
- A single NHB32-C unit can support up to 32-channels of digital audio I/O and one control signal I/O
- Four separate 8-channel AES/EBU input/output terminals
- CobraNet transfers high-quality 20-bit or 24-bit 48kHz digital audio over four bundle paths in real time
- MIDI, head amp remote (AD8HR, AD824) and amplifier control
- Network amp manager software allows central control of both audio and control signals
Product Info
Tech Specs
Documents
NHB32-C features four separate 8-channel AES/EBU input/output terminals and uses CobraNet technology to transfer high-quality 20-bit or 24-bit 48kHz digital audio over four bundle paths in real time. NHB32-C is designed to handle not only digital audio, but also control data as well. With this capability the unit can be used for one of three types of control MIDI, head amp remote (for the AD824 or AD8HR remote head amplifier/AD converter) or for monitoring and control of Tn and PC-1N power amplifiers connected to the ACU16-C amp control unit. CobraNet can handle up to eight bundles of digital audio in multicast (one-to-all) mode via a single CAT-5/100Base-TX cable. Up to eight NHB32-C units can be networked, with each unit transferring and receiving four bundles and 64 channels of digital audio can be received from any ACU16-C or NHB32-C on the network via CobraNet. A networked system with ACU16-C and NHB32-C units is capable of handling up to 64 channels of digital audio. Moreover, multicast and unicast (one-to-one) mode can be used in combination to optimize bandwidth so that more than 64 channels of digital audio data can be transferred on a network system.
- A single NHB32-C unit can support up to 32-channels of digital audio I/O and one control signal I/O
- Four separate 8-channel AES/EBU input/output terminals
- CobraNet transfers high-quality 20-bit or 24-bit 48kHz digital audio over four bundle paths in real time
- MIDI, head amp remote (AD8HR, AD824) and amplifier control
- Network amp manager software allows central control of both audio and control signals
- Up to eight NHB32-C units can be networked with each unit transferring and receiving four bundles and 64 channels of digital audio can be received from any ACU16-C or NHB32-C on the network via CobraNet
- Networked system with ACU16-C and NHB32-C units is capable of handling up to 64 channels of digital audio
- Multicast and unicast modes can be used in combination to optimize bandwidth
- Primary and secondary CobraNet ports are built-in, providing redundant network for reliable operation
- Spec Sheet available - Yes
- Maximum unit count: 8 (for CobraNet network)
- Maximum input channel count (from/to CobraNet): 32 channel (48kHz/20bit), 28 channel (48kHz/24bit)
- Sampling Frequency Rate: 48/96 kHz
- Power Requirements: AC 220 to 240V, 50/60Hz, 40W
- Depth: 386 mm
- Height: 44 mm
- Width: 480 mm
- Product Weight: 5 kg
Network Hub/Bridge
332 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Yamaha Commercial Audio Systems, Inc.
Model: NHB32-C
Request more information from a dealer near you
close