Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Audio I/O Distribution and DSP Expansion Unit for CobraNet Network, 4 Mic/Line I/O
Series: DME Satellite
Model: DME4io-C
- Vastly expand the capabilities and capacity of a DME-based sound system or any other networked audio devices that use CobraNet protocol
- Controllable remote I/O plus powerful DSP processing capability allow distributed processing for unprecedented system design flexibility and power
- Reduce system cabling costs while maximizing overall reliability
- Also usable as stand-alone processors in smaller systems
- Full 24-bit 96kHz audio processing, plus the same highly-acclaimed analog circuitry used in the DME24N
Product Info
Tech Specs
Documents
The DME4io-C is an audio I/O distribution and DSP expansion unit is equipped with CobraNet networking capability that provides easy setup for remote placement of analog input and output devices in temporary sound reinforcement systems. Offer greater freedom for system design while reducing cabling costs. Overall system redundancy and reliability can be enhanced through distributed placement of analog I/O and signal processing. CobraNet ("-C" suffix) network optimally match the requirements of your application or an existing network infrastructure. I t allows up to 64 audio channels to be transferred over a single Cat-5 Ethernet cable, significantly reducing cabling infrastructure and cost requirements. The CobraNet based DME satellite C series offers maximum advantage in redundant or VLAN type switched networks, and is primarily suited to complex installed systems.
- Vastly expand the capabilities and capacity of a DME-based sound system or any other networked audio devices that use CobraNet protocol
- Controllable remote I/O plus powerful DSP processing capability allow distributed processing for unprecedented system design flexibility and power
- Reduce system cabling costs while maximizing overall reliability
- Also usable as stand-alone processors in smaller systems
- Full 24-bit 96kHz audio processing, plus the same highly-acclaimed analog circuitry used in the DME24N
- Supplied DME designer software application can be used to control, monitor and create complete processing configurations in the same way as with the DME64N or DME24N
- 8-in/4-out GPI terminals allows direct, easy connection to wall-mountable CP4SF control panels featuring 4 switches and 4 faders
- Spec Sheet available - Yes
- Frequency Response: 20 to 20kHz at 48kHz Fs and 20 to 40kHz at 96kHz Fs (0, -1.5, +0.5)
- Total Harmonic Distortion: <0.05 % (+4dBu, 10dB gain)
- Hum & Noise: -128 dBu (EIN)
- Dynamic Range: 106 dB
- Crosstalk: < -80 dB
- Power Consumption: 40 W
- Rack Units (Height): 1
- Depth: 358.65 mm
- Height: 43.18 mm
- Width: 480.06 mm
- Product Weight: 4.40 kg
Audio I/O Distribution and DSP Expansion Unit
232 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Yamaha Commercial Audio Systems, Inc.
Model: DME4io-C
Request more information from a dealer near you
close