AutoTRAK 2.0 EasyTALK Wireless Audio Interface (International)
Model: 999-7230-001
- Simultaneous balanced (+4dBu) and unbalanced (-10dBu) outputs
- USB 2.0 compatible audio peripheral device - emulates a speaker to the PC
- Full-band wireless microphone incorporated into AutoTrak 2.0 Lanyard
- 2.4GHz FHSS radio link up to 100 feet line of sight
- Uses license-free ISM band for worldwide operation
The AutoTrak 2.0 wireless audio interface is designed to incorporate the instructor’s audio into our tracking system. Featuring a high-quality unidirectional microphone element built into the IR lanyard, AutoTrak 2.0 eliminates the need for a separate wireless microphone system. And the 2.4GHZ full frequency spectrum audio offers interference-free operation and wide-band sound quality, even in the presence of other conventional channel-mapped wireless systems.
There are two audio outputs to connect directly with your room’s existing audio system and with the enhanced DSP functions; you can customize the audio for specific room and speaking conditions. Besides both balanced and unbalanced outputs, our wireless audio system also incorporates a USB audio output as well.
The USB audio output can be directly connected to a PC as a microphone input for use with Skype, Microsoft Lync, Google+ or other software-based videoconferencing clients. It truly is a plug and play device, so no software, drivers or configuration is needed – resulting in an easy, automated installation. In addition, the balanced and unbalanced audio outputs easily integrate with your room’s existing audio system.
- Simultaneous balanced (+4dBu) and unbalanced (-10dBu) outputs
- USB 2.0 compatible audio peripheral device - emulates a speaker to the PC
- Full-band wireless microphone incorporated into AutoTrak 2.0 Lanyard
- 2.4GHz FHSS radio link up to 100 feet line of sight
- Uses license-free ISM band for worldwide operation
- DSP functions for audio conditioning
- Additional antenna extension kit Available
- Warranty - Yes
- Spec Sheet available - Yes
- Depth: 152.40 mm
- Height: 43.69 mm
- Microphone:
-
Type: Unidirectional Condenser Microphone
Lanyard Frequency Response: 100HZ to 12KHZ
Max Input Level: 115dB SPL - Width: 480.82 mm
- Audio Specifications:
-
Frequency Respones: 20 Hz to 20kHz
Dynamic Range: >75dB
THD + Noise: <0.02% - GPIO:
-
Inputs: Mute Control, Volume Up, Volume Down (Active Logic Low)
Outputs: Mute Status - Product Weight: 1.50 kg
- Active Power: 12 Watt
- Analog Line Output:
-
Connector: XLR (Balanced) & RCA (Unbalanced)
Impedance: 50 ohm (Balanced) & 10Kohm (Unbalanced)
Nominal Level: +4dBu (Balanced) & -10dBu (Unbalanced) - Warranty (Length/Type): 2 Years
- Operating Temperature (Maximum): 40 C
- Operating Temperature (Minimum): 0 C
- USB audio interface:
-
Connector: Type-B
Type: USB 2.0 Compliant
PC Controls: Mute & Volume - Radio Link:
-
Type: Adaptive Frequency Hopping Spread Spectrum
Frequency Range: 2400 to 2483
Antenna: Monopole
Maximum Power Output: 5dBm
Receiver Sensitivity: -83 dBm - Audio Proccessing Settings:
-
8-Position Dip Switch for Compressor, Speaker EQ Filter, Mix Mode
- Belt Pack Battery:
-
Type: 4400mAH Lithium Ion
Typical Talk Time: > 18 hours
Typical Full-Charge Time: at 9 hours (from dead battery)
Suggested Products
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au