Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Evolution Wireless Digital EW-DX EM 2 Rack Receiver
Model: EW-DX EM 2
- 2 channel half rack (9.5ft)
- Up to 88 MHz switching bandwidth
- PoE IEEE 802.3af Class 3
- Equidistant Channel Spacing: 146 channels in standard mode; 293 channels in Link Density Mode
- Network enabled for control with Sennheiser Control Cockpit/media control system through a number of 3rd party modules
Product Info
Tech Specs
Documents
Half-rack (9.5 inch) receiver for use with Evolution Wireless Digital handheld, bodypack and tablestand transmitters.
- 2 channel half rack (9.5ft)
- Up to 88 MHz switching bandwidth
- PoE IEEE 802.3af Class 3
- Equidistant Channel Spacing: 146 channels in standard mode; 293 channels in Link Density Mode
- Network enabled for control with Sennheiser Control Cockpit/media control system through a number of 3rd party modules
- Clear and easy focused user interface with OLED display
- Ethernet connectivity (IPv4 and IPv6)
- Secure AES 256 encryption
- External PSU 12V/1A
- All-metal housing
- Includes:
- EW-DX EM 2 rack receiver
- 2 rod antennas
- power supply with country adapters
- GA 3 rackmount set
- 4 rubber feet
- quick guide
- safety guide
- manufacturer declaration sheet
- Rackmountable - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 55 C
- Operating Temperature (Minimum): -10 C
- Wireless: Yes
- System:
•Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz
•Audio frequency response: 20 Hz - 20 kHz (-3 dB) at 3 dBfs
•Audio THD: -60 dB for 1 kHz at -3 dBfs input level
•Dynamic range: 134 dB
•System latency: 1.9 ms
•Relative humidity: 5 - 95 % (non-condensing) - EW-DX EM 2 (Rack Receiver) :
•Input voltage 11 - 13 V or PoE IEEE 802.3af Class 0 (CAT5e or higher)
•Input current: 1 A
•Transmit power (radiated): BLE: max. 10 mW EIRPAudio output power 18 dBu max.
•Headphone output: 2x 70 mW at 32 OHMS
•Ethernet: RJ-45 socket, IEEE802.3; 100Base-TX (half+full duplex); 10Base-T (half+full duplex) (CAT5e or higher)
•Dimensions: 212 x 44 x 189 mm (8.35" x 1.73" x 7.44")
•Weight: approx. 1000 g (2.2 lbs) (without antennas and power supply
Receiver
353765 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Sennheiser
Model: EW-DX EM 2
Request more information from a dealer near you
close