Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Music on Hold Amplifier - 1 Watt
Series:
Model: TX-1W
- Feed Audio into Telephone Equipment Music-on-Hold Input
- Adjustable Audio Level
- Optimized Sound Quality
- Unbalanced Output, up to 1 Watt
- Balanced Transformer driver Output
Product Info
Tech Specs
Related Products
Documents
Accessories
The TX-1W is the ideal choice in on-site installations where the central telephone switching unit needs to be fed with music, voice or combined music/voice signals.There is a wide variety of telephone instruments in use. When a caller is placed on hold, the audio quality perceived is affected by the caller's own telephone, as well as the telephone lines, central switch and on-site equipment. Due to these variations, conventional audio amplifiers used as music-on-hold drivers frequently produce annoying artifacts at the caller's earpiece. Attempts to reduce listener fatigue through high-frequency rolloff alone tend to produce a muffled, tired sound.The TX-1W features a spectral response specifically characterized to match the broadest variations in telephone audio distribution, producing a lively, crisp, interesting sound without the annoying resonances and distortions prone to creating listener fatigue.
- Feed Audio into Telephone Equipment Music-on-Hold Input
- Adjustable Audio Level
- Optimized Sound Quality
- Unbalanced Output, up to 1 Watt
- Balanced Transformer driver Output
- Ultra Compact Size
- Amplifier Signal Type - Audio
- Amplifier Type - Other
- Operating Temperature (Maximum): 50 C
- Operating Temperature (Minimum): 0 C
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Number of Inputs: 1
- Number of Outputs: 1
- Total Harmonic Distortion + Noise (THD+N): 0.50 %
- Inputs: Unbalanced via standard phono jack
- Input Level: -10 dBV nominal
- Gain: -10 to +25 dB (adjustable)
- THD+N:
< 0.5 % (1 kHz @ Maximum Output 1 W)
< 0.2% (1 kHz @ +4 dBu) - Residual Noise: < -75 dB (referred to 600 ohm +4 dBu, or to 1 W RMS)
- Outputs: 1 Balanced @ 600 ohm to drive transformer inputs 1 Unbalanced adjustable line-level to 1 W
- Power Requirement: 24 to 33 VDC @ 150 mA
ST-PA2
- Utility Audio Amplifier - 2 Watt
Music-on-Hold Amplifier
141 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Radio Design Labs
Model: TX-1W
Request more information from a dealer near you
close