Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2-channel Mini Power Amplifier
Model: QTA ACC1
- Class D high efficiency amplifier
- Stereo output 20 watts by two channels or bridged 40 watt mono
- 2 Mic/line switchable inputs: choice of RCA or Phoenix connectors to give a choice of Balanced or unbalanced inputs
- Input 1 and input 2 volume controls plus bass and treble tone controls
- Speaker stereo outputs at 4 ohms and speaker bridge output at 8 ohms
Product Info
Tech Specs
Documents
QTA ACC-1 is a high quality compact class D 2×20 watt highly efficient digital amplifier powered by a 24 volt power supply. It can be powered by its own 24V supply or alternatively, by a 24Vdc party line. The QTA ACC-1 is perfect for the education, A/V installation and high end commercial market where compact high intelligibility speakers in small spaces or distributed environments are required. It is an ideal partner for the Quest M series wall and in wall speakers and because of the low radiated heat of the amplifier, this unit may be installed within the ceiling or wall cavity or attached to the rear of a flat screen TV monitor. Volume may be set at a fixed level or changed via a Projector remote control. When more power is required, bridge mode can be selected to deliver 40W RMS.
- Class D high efficiency amplifier
- Stereo output 20 watts by two channels or bridged 40 watt mono
- 2 Mic/line switchable inputs: choice of RCA or Phoenix connectors to give a choice of Balanced or unbalanced inputs
- Input 1 and input 2 volume controls plus bass and treble tone controls
- Speaker stereo outputs at 4 ohms and speaker bridge output at 8 ohms
- Built-in limiter for low noise and efficient operation, which may be switched off
- 24Vdc power supply adapter is included
- Smart compact size for tabletop or wall mount design by integrated mounting brackets
- Amplifier Type - Power Amplifier
- Warranty - Yes
- ROHS Compliant - Yes
- Impedance: 47000 ohm
- Sensitivity: 32 dB
- Total Harmonic Distortion + Noise (THD+N): 0.10 %
- Maximum Frequency Response (Bandwidth): 25 kHz
- Maximum Frequency Response (Bandwidth): 25000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- DC Voltage: 24 Volts
- Depth: 90 mm
- Height: 38 mm
- Width: 152 mm
- Product Weight: 0.45 kg
- Warranty (Length/Type): 2 Years Limited
- Efficiency: 85 %
- Certifications: CE
- Number of Channels: 2
- ROHS Compliant: Yes
- Power Handling: 20 Watt
Speakers and Amplifiers
5622 kb
- Brochure
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Quest Engineering
Model: QTA ACC1
Request more information from a dealer near you
close