Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Full-range Wide-angle Line Array Loudspeaker System, Baltic Birch Plywood Construction
Series: WideLine-10
Model: WL2102w
- Multiple aperture diffraction slot waveguide provides exceptionally wide horizontal coverage (140°) and near ideal vertical line source
- Exceptionally high output capability in very compact form factor
- Bi-amp or tri-amp design
- Dual 10-inch long excursion, high power, low-frequency transducers
- Single 3-inch diaphragm neodymium compression driver
Product Info
Tech Specs
Documents
QSC WideLine is full range line array loudspeaker system designed for use in wide variety of venues, ranging from ballrooms, theaters and nightclubs to concert halls, houses of worship and arenas. The WideLine features an open, natural sound quality and exceptionally wide 140° horizontal coverage pattern the widest of any line array system currently available. WideLine is three transducer system and can be operated in either biamplified or triamplified modes. Both 10-inch diameter low-frequency transducers are used to cover the lowest frequency range. One driver covers only low frequencies while the range of the other extends through the mid frequencies to the mid/high crossover point. The use of single midrange transducer allows the horizontal coverage pattern to remain as wide as possible and assures smooth response both on and off axis at the transition to the diffraction slot loaded high frequency section. Biamplification uses passive elements to affect the required frequency response shading of the low-frequency drivers and offers reduced amplifier channel counts and simplified wiring. Triamplification allows the required low-frequency shading to be controlled with greater precision via active electronics and is recommended where maximum output and highest sound quality are required. WideLine's 16 ohms per transducer low frequency impedance optimizes allocation of amplifier channels. In biamp mode the LF/MF sections of up to four enclosures can be powered by one amplifier channel operating into a two ohm load. In triamp mode the LF and MF sections of up to eight enclosures can be powered by a single two channel amplifier. High-frequency section consists of 1.4-inch exit, 3-inch 16 ohms, neodymium compression driver, mounted on a proprietary multiple aperture diffraction slot waveguide. This patented device produces the ideal linear source needed for good line array performance, and facilitates the enclosure’s exceptionally wide horizontal coverage. WL2102 features lightweight, highly weather resistant cored composite construction resulting in a net weight of 70lbs per enclosure, less than half the weight of some conventional designs.
- Multiple aperture diffraction slot waveguide provides exceptionally wide horizontal coverage (140°) and near ideal vertical line source
- Exceptionally high output capability in very compact form factor
- Bi-amp or tri-amp design
- Dual 10-inch long excursion, high power, low-frequency transducers
- Single 3-inch diaphragm neodymium compression driver
- WL2102 cored composite construction results in lighter weight (70lbs, 31.8kg) and greater weather-resistance
- WL2102-w birch ply construction offers reasonable weight (83lbs, 37.7kg) at lower cost
- Fully captive hardware design incorporates all components necessary for box to box rigging
- RoHS Compliant
- Horizontal Symmetry - Yes
- Vertical Symmetry - Yes
- Spec Sheet available - Yes
- Configuration: bi-amp or tri-amp mode
- Connectors: 2x Neutrik Speakon NL8 in parallel
- Finish: black/white texture coat
- Material: baltic birch plywood
- Regulatory Compliance: RoHS
- Grille: perforated, formed powder coated steel
- Low Frequency Transducer: 2x 400W, 16 ohms 10-inch woofer, 3-inch voice coil, ceramic magnet assembly
- Cabinet Type: ported, trapezoidal
- High Frequency Transducer: 1.4-inch exit, 3-inch titanium diaphragm, neodymium magnet assembly
- Vertical Coverage: dependent on number of elements used
- Frequency Response (-10dB): 48Hz to 20kHz (with recommended DSP processing)
- HF Nominal Impedance: 16 ohms
- Frequency Response (+/-3dB): 55Hz to 18kHz (with recommended DSP processing)
- Horizontal Symmetry: Yes
- Vertical Symmetry: Yes
- Coverage Horizontal: 140 degrees
- Construction: Baltic birch plywood
- Bi-amp mode LF nominal impedance: 8 ohms
- Tri-amp LF nominal impedance: 2x 16 ohms
- HF continuous power capacity: 80 W (2 hours, AES1984-2 method, 1 to 10kHz)
- LF bi-amp mode continuous power capacity: 600 W (2 hours, AES1984-2 method, 80 to 800Hz)
- HF maximum recommended power: 300 W
- LF bi-amp mode maximum recommended power: 1400 W
- LF tri-amp mode maximum recommended power: 2x 700W
- HF sensitivity (1W at 1m): 107.5 dB (single cabinet measured in free space)
- LF sensitivity (1W at 1m): 98 dB (single cabinet measured in free space, LF drivers connected in parallel)
- HF/LF maximum peak output: 133 dB (SPL at 1m)
Line Array Loudspeaker System
222 kb
- Data Sheet
Request Quote
Suggested Products
by
Electro-Voice
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Q-SYS
Model: WL2102w
Request more information from a dealer near you
close