Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
HDMI Extender with IR Control & Stereo Audio: Extend up to 300 ft away
Series: XTENDEX®
Model: ST-C6HD-AIR-300
- Transmits an HDMI signal over one CAT5e/6/7 cable.
- Full IR control of HDMI source from remote HDTV using existing source remote control.
- Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
- Refer to the resolution chart in the specifications section for resolutions using different CATx cable types and lengths.
- Available with optional stereo audio.
Product Info
Tech Specs
Documents
The XTENDEX® HDMI Extender transmits digital video, audio and IR signals up to 300 feet using one CAT5e/6/7 cable. Each video extender consists of a local unit that connects to an HDMI source and IR emitter, and a remote unit that connects to an HDMI display and IR receiver.
For more information, visit http://www.networktechinc.com/hdmi-extender.html
For more information, visit http://www.networktechinc.com/hdmi-extender.html
- Transmits an HDMI signal over one CAT5e/6/7 cable.
- Full IR control of HDMI source from remote HDTV using existing source remote control.
- Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
- Refer to the resolution chart in the specifications section for resolutions using different CATx cable types and lengths.
- Available with optional stereo audio.
- HDMI features supported: 12-bit Deep Color; x.v.Color; Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, and DTS; Bandwidth up to 225 MHz (6.75 Gbps; Support for CEC (consumer electronic control) compatible devices; Lip Sync.
- HDCP compliant.
- Supports the DDC2B protocol.
- Only one power supply is necessary to power both the local and remote units.
- Extender Type - Audio
- Extender Type - HDMI
- Extender Type - Other
- Warranty - Yes
- ROHS Compliant - Yes
- Spec Sheet available - Yes
- Depth: 78.49 mm
- Height: 27.43 mm
- Power: Powered from a single power supply attached to either the local or remote unit. Local or remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter. (Country-specific AC adapter included.)
- Width: 64.52 mm
- Dimensions: WxDxH (in): 2.54x3.09x1.08
- Regulatory Compliance: CE, RoHS
- Cables: Use HD-xx-MM cable to connect an HDMI source or display. Use DVI-HD-xx-MM cable to connect a DVI source or display. Use SA-xx-MM cable with units with stereo audio option to connect a stereo audio source or speakers. Use CAT5e/6/7 straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included). Use CAT6A-BULK23-BLUE-NPC CAT6a 750 MHz Solid Unshielded Bulk Cable terminated with 6A-PLG-SH-BFA CAT6a Shielded Field Assembly RJ45 Connectors for the best performance at 1080p resolution. IR transmitter/receiver included.
- Environmental: Operating temperature: 32 to 122°F (0 to 50°C). Storage temperature: -20 to 140°F (-30 to 60°C). Operating and Storage Relative Humidity: 5 to 90% non-condensing RH.
- Remote unit: One female HDMI connector for display. IR extension support: one female 3.5mm port for IR receiver. IR frequency range: 33 to 40 kHz. Center Carrier Frequency: 36 kHz. Optional stereo audio support: 3.5mm jack One female RJ45 port for sending/receiving high definition video/audio signals, IR signal, CEC signal, and DDC signal. Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA). Supports embedded digital audio through HDMI compatible TVs or audio receivers. Auto equalization for different lengths of CAT5e/6/7 cable.
- Local Unit: Compatible with a computer or HDTV video source with HDMI output. One female HDMI connector. IR extension support: one female 3.5mm port for IR emitter. Optional stereo audio support: 3.5mm jack One female RJ45 port for sending/receiving high definition video/audio signals, IR signal, CEC signal, and DDC signal.
- Optional Stereo Audio: Stereo audio can be heard both locally and remotely. Frequency response: 20 Hz to 20 kHz, ±1 dB. Signal-to-Noise Ratio (SNR): 76 dBA. Total Harmonic Distortion and Noise (THD+N): 0.017%. Stereo crosstalk: -70 dB. Input impedance: 10k Ohms. Line level output; supports multimedia speakers. Maximum I/O levels: 3.1Vp-p (line level). CD quality audio output.
- Warranty (Length/Type): Two years.
- Certifications: CE, RoHS
- Minimum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Signal to Noise Ratio: 76 dB
- Total Harmonic Distortion + Noise (THD+N): 0.02 %
- Crosstalk: -70 dB
- Transmission Range: 9144 cm
- Input Impedance: 10,000 ohm
- Operating Temperature (Maximum): 50 C
- Operating Temperature (Minimum): 0 C
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
ST-C6HD-IR-300 - Application Drawing
41 kb
- Other
ST-C6HD-IR-300 - Installation and Operation Manual
1360 kb
- Instructions
ST-C6HD-IR-300 - Data Sheet
233 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Network Technologies Inc (NTI)
Model: ST-C6HD-AIR-300
Request more information from a dealer near you
close