Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Stainless Steel Vertical Liquid Level Float Switch
Series: ENVIROMUX
Model: E-LLS-SF-10CM
- Vertically mounted float switch – install in the top or bottom of the tank.
- Magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid level.
- Single-pole single-throw (SPST) circuitry.
- Configure for normally open or normally closed circuit connection. When installed on top of the tank and used for sensing when liquid rises to a certain level, the sensor will be "normally closed" and will open when the liquid reaches that level. When installed on the bottom of the tank with liquid already there and used for sensing the drop in the liquid level beyond a certain point, the sensor will be "normally open" and will close when the liquid drops to that level.
- IP68-rated water and dust protection.
Product Info
Tech Specs
Related Products
Liquid, Water & Chemical Level Float Sensors compatible with ENVIROMUX® E-2D, E-5D and E-16D
For more information, visit http://www.networktechinc.com/liquid-level-float-sensor.html
- Vertically mounted float switch – install in the top or bottom of the tank.
- Magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid level.
- Single-pole single-throw (SPST) circuitry.
- Configure for normally open or normally closed circuit connection. When installed on top of the tank and used for sensing when liquid rises to a certain level, the sensor will be "normally closed" and will open when the liquid reaches that level. When installed on the bottom of the tank with liquid already there and used for sensing the drop in the liquid level beyond a certain point, the sensor will be "normally open" and will close when the liquid drops to that level.
- IP68-rated water and dust protection.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D. To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor cables using the included butt splice connectors.
- Warranty - Yes
- Includes: two butt splice connectors for extending the cable length up to 1,000 feet.
- Electrical rating: AC 220V/1A; DC 24V/0.5A
- Wire gauge: 26 AWG
- Stem Length: 3.93 in (100 mm)
- Cable Length: 15.75 in (40 cm)
- Operating Temperature (Minimum): -20 C
- Max pressure: 217.5 psi (1.5 MPa)
- Float specific gravity: 0.7
- Float Diameter: 1 in (25 mm)
- Mounting thread: M10x1.5
- Operating Temperature (Maximum): 90 C
- Material: SUS304 /SUS316L stainless steel
E-16D
- Large Enterprise Environment Monitoring System. Power: AC. Logging: 1,000 data log entries; 1,000 event log entries.
E-16DEL
- Large Enterprise Environment Monitoring System. Power: AC. Logging: 1,200,000 data log entries; 3,000 event log entries.
E-2D
- Small Enterprise Environment Monitoring System
E-LLS-PF
- Plastic Vertical Liquid Level Float Switch
E-LLS-SF-25CM
- Stainless Steel Vertical Liquid Level Float Switch
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Network Technologies Inc (NTI)
Model: E-LLS-SF-10CM
Request more information from a dealer near you
close