53Hz to 19kHz Ultra-Wide Coverage Loudspeaker
Model: UPQ-D3
- Wider vertical coverage, constant-Q horn with -6dB points at 80° x 80° (-10 dB points at 100° x 100°)
- An innovative, newly designed, highly efficient Class D amplifier with reduced current draw that reproduces any sound with linearity over a wide dynamic range
- Optimized frequency and phase response characteristics
- Lightened cabinet weight of 95lbs (43kgs)
- Redesigned cabinet that retains the original size, grille frame and rigging options of previous UPQ products
Meyer Sound’s UPQ-D3 wide coverage loudspeaker evolves from the UPQ-1P and UPQ-2P product line, now optimized using the advanced technology that made the LEO® family an award-wining product line.
UPQ-D3 continues to offer an extremely consistent polar response and a gentle coverage rolloff that extends uniformly out to its -10 dB points of 100° by 100°. The horn’s smooth and consistent performance is the result of meticulous research in Meyer Sound’s anechoic chamber, and it exhibits a remarkably consistent beamwidth in both the horizontal and vertical planes. In addition, the UPQ-D3 horn delivers uniform attenuation for all frequencies outside the specified beamwidth.
In addition to the Constant-Q horn, the loudspeaker features a low frequency 15 in neodymium magnet cone driver and 4 in diaphragm compression driver, both designed and manufactured at Meyer Sound’s Berkeley, California headquarters. Suitable for use in a range of sound reinforcement applications, the UPQ-D3 works well as a front-of-house main loudspeaker in small to mid-sized venues, or as a fill loudspeaker in larger systems.
- Wider vertical coverage, constant-Q horn with -6dB points at 80° x 80° (-10 dB points at 100° x 100°)
- An innovative, newly designed, highly efficient Class D amplifier with reduced current draw that reproduces any sound with linearity over a wide dynamic range
- Optimized frequency and phase response characteristics
- Lightened cabinet weight of 95lbs (43kgs)
- Redesigned cabinet that retains the original size, grille frame and rigging options of previous UPQ products
- Application:
- Theatrical sound reinforcement
- Houses of worship
- Portable and installed audio-visual systems
- Nightclubs
- Horizontal Symmetry - Yes
- Loudspeaker Mount Type - Pole (Stand Speakers)
- Vertical Symmetry - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 18 kHz
- Maximum Frequency Response (Bandwidth): 18000 Hz
- Minimum Frequency Response (Bandwidth): 56 Hz
- Minimum Frequency Response (Bandwidth): 0.06 kHz
- Coverage Horizontal: 100 degrees
- Coverage Vertical: 100 degrees
- Wireless: No
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Depth: 461.77 mm
- Height: 715.01 mm
- Width: 482.60 mm
- Product Weight: 45 kg
- Colour: Black
- Acoustical:
•Operating Frequency Range: 53Hz - 19kHz
•Phase Response: 80Hz - 18kHz ±45°
•Linear Peak SPL1: 133dB (M-noise), 130.5dB (Pink noise), 133.5dB (B-noise) - Transducers:
•Low Frequency:One high-power 15 in cone driver with neodymium magnet; 2ohm nominal impedance
•High Frequency:One 4 in diaphragm compression driver; 8ohm nominal impedance - Audio Input:
•Connectors: XLR 3-pin female input with male loop output; optional XLR 5-pin connector to accommodate both balanced audio and RMS signals
•Input Level: Audio source must be capable of producing +20 dBV (10 V rms) into 600ohm to produce the maximum peak SPL over the operating bandwidth of the loudspeaker - Amplifier:
•Type: 2-channel, Class-D
•Total Output Power: 1800W peak - AC Power: Connectors powerCON 20 input with loop output
- Current Draw:
•Maximum Long-term Continuous Current (>10sec) 2.8A rms (115VAC); 1.4A rms (230VAC); 3.2A rms (100VAC) - Enclosure: Premium multi-ply birch with slightly textured black finish
- Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
Suggested Products
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au