Advanced Intelligent DSP RF Receiver 6-Pack (72 MHz)
Model: LP-50-072-01
- All-inclusive 6-pack is ideal for venues to upgrade an existing 72 MHz assistive listening systems or expand an iDSP Advanced System
- Advanced DSP SQTM noise reduction technology delivers 20 dB less noise and hiss than any other listening device
- Integrated neck loop / lanyard with DSP loop driver improves the listening experience for T-coil users
- Smallest device of its kind makes it easier to wear and for venues to dispense, store and maintain
- Charging tray can be mounted several ways for easy dispensing; optional cable management system further reduces cable clutter
The LP-50-072-01 is designed to make it easy to order all the components you need for an exceptional listening experience. Ideal for venues to upgrade an existing 72 MHz assistive listening system or expand an iDSP Advanced System with six iDSP units. The package includes the LR-5200-072 iDSP receiver, integrated neck loop/lanyard, universal ear speaker, and charging tray. With Listen’s unique DSP SQTM noise reduction technology, users experience 20 dB less noise and hiss than any other listening device. Advanced green battery technology dramatically reduces costs of ownership and hassles while reducing the number of batteries in landfills. A field replaceable Lithium-ion battery is included with each unit. The integrated neck loop / lanyard with DSP loop driver, improves the listening experience for T-coil users. iDSP is the smallest device of its kind, making it easier to wear and easier for venues to dispense, store and maintain. The charging tray can be mounted several ways; wall, drawer, rack, table top all for easy dispensing. An optional cable management system can be ordered to further reduce cable clutter. The LR-5200-072 has an OLED display to program channel names, monitor battery status, channel status, and charge activation. Programmable channel select button allows user to cycle through active channels, seek to or lock to a channel. Connect the iDSP neck loop/lanyard or ear phones via two 3.5 mm output jacks (receivers could be shared). The Micro USB connection is used with included iDSP software for charging, set up, programming, inventory management and firmware updates.
Includes: Six (6) LR-5200-072-P1 Intelligent DSP RF Receiver Package 1 (72 MHz)*, One (1) LA-381-01 Intelligent 12-Unit Charging Tray (North America).
*The LR-5200-072-P1 comes with an ear phone/neck loop lanyard, universal ear speaker, quick start guide and a non-proprietary field replaceable Lithium-ion battery.
- All-inclusive 6-pack is ideal for venues to upgrade an existing 72 MHz assistive listening systems or expand an iDSP Advanced System
- Advanced DSP SQTM noise reduction technology delivers 20 dB less noise and hiss than any other listening device
- Integrated neck loop / lanyard with DSP loop driver improves the listening experience for T-coil users
- Smallest device of its kind makes it easier to wear and for venues to dispense, store and maintain
- Charging tray can be mounted several ways for easy dispensing; optional cable management system further reduces cable clutter
- Limited Lifetime Warranty with hassle-free support
- Can be worn around the neck, with the belt clip, or concealed in a pocket, making it the most discreet listening device on the market
- Advanced green battery technology dramatically reduces costs of ownership and hassles while reducing the number of batteries in the landfill
- Use for multi-channel applications where the users need the convenience of changing channels for themselves
- System Distortion: <2% total harmonic distortion (THD) at 80% deviation
- Output/s: Two (2) 3.5 mm (0.14 in.) connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm
- Frequency Response: 50 Hz - 15 kHz (±3 dB)
- System Signal to Noise Ratio: SQ enabled 80 dB, SQ disabled 60 dB
- Set-up Controls: Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel
- User Controls: Power, up/down volume, Listen button for end user channel selection
- Programming: Via software and USB port
- Display: Channel designation,battery level, unit number, charging status
- LEDs: Flashes when batteries are low or to indicate charging, solid when fully charged
- Sensitivity: .6uV typical, 1 uV maximum for 12 dB sinad
- Frequency Range: 72.025 - 75.950 MHz
- Number of Channels: 17 wide band, 40 narrow band
- Antenna Type: Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable
- Frequency Accuracy: ± .005% stability 32 to 122 ºF (0 to 50 ºC)
- Squelch: Programmable in 20 steps, automatic on loss of RF signal
- Power Supply: Micro USB connector, 5 V, 500 mA
- Battery Life: 8 Hours of continuous use
- Battery Type: Lithium-ion 3.7 Vdc, 1200 mAh
- Battery Charging Time: Fully charged in 2.5 Hours
- Dimensions with Belt Clip: 3.75 x 2.0 x 0.80 in. (9.6 x 5.0 x 2.1 cm)
- Dimensions (H x W x D): 3.75 x 2.0 x 0.64 in. (9.6 x 5.0 x 1.7 cm)
- Colour: Black
- Unit Weight: 1.60 oz. (45 g)
- Unit Weight with batteries: 2.40 oz. (68 g)
- Shipping Weight: 3.20 oz. (91 g) with 1.0 lbs. (454 g) minimum
- Temperature - Operation: 14 to 104 ºF (-10 to 40 ºC)
- Temperature - Storage: (-)4 to 122 °F (-20 to 50 °C)
- Relative Humidity: 0 to 95% relative humidity, non-condensing
- Standards: FCC Part 15, Part 90, Industry Canada, RoHS
Suggested Products
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au