Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
30-band Square One Graphic Equalizer
Model: SQ1G
- 45mm faders with integral dust guards, long-throw faders for maximum accuracy and resolution
- Signal present and clip LEDs, maximum input capability of +22dBu
- Auto voltage-sensing, operates anywhere between 100 to 240V plus or minus 10%
- Continues to pass audio in the event of power failure
- Roadworthy 3U steel chassis, designed to withstand the rigours of the road
Product Info
Tech Specs
30-band Square one graphic equalizer. Continues to pass audio in the event of power failure. 45mm faders with integral dust guards, long-throw faders for maximum accuracy and resolution. Signal present and clip LEDs, maximum input capability of +22dBu. Auto voltage-sensing, operates anywhere between 100 to 240V plus or minus 10%. Continues to pass audio in the event of power failure, roadworthy 3U steel chassis, designed to withstand the rigours of the road.
- 45mm faders with integral dust guards, long-throw faders for maximum accuracy and resolution
- Signal present and clip LEDs, maximum input capability of +22dBu
- Auto voltage-sensing, operates anywhere between 100 to 240V plus or minus 10%
- Continues to pass audio in the event of power failure
- Roadworthy 3U steel chassis, designed to withstand the rigours of the road
- ’Q' or bandwidth of square ONE's filters is proportional to gain applied and so gives increasing focus on real problem frequencies
- Square ONE graphic's LPF is fixed at 12kHz, optimal for stage monitoring applications, both loudspeaker and IEM systems, and will increase available headroom as well as providing HF drivers with some thermal protection against ultrasonic frequencies
- Equalizer Type - Graphic Equalizer
- Equalizer Input Connector - 1/4" TRS
- Equalizer Input Connector - XLR
- Equalizer Output Connector - 1/4" TRS
- Equalizer Output Connector - XLR
- Impedance: 600 ohm
- AC Voltage: 240 Volts
- Active Power: 25 Watt
- Eq Out: +/-0.5 dBu
- Eq In (flat): +/-0.5 dBu
- Distortion (THD+N): < 0.005% (at 1kHz, +4dBu)
- Noise Floor: <-90 dBu
- Overload Indicator: +19 dBu
- Gain: infinity to +6 dBu
- Minimum Load Impedance: 600 ohms
- Source Impedance: <60 ohms
- Centre frequencies: BS EN ISO 266:1997 25Hz to 20kHz (1/3 octave)
- Tolerance: +/-5%
- Maximum Boost/Cut: +/-12 dB
- High Pass Filter Slope: 12 dB/Octave
- Low Pass Filter Slope: 12 dB/Octave
- Depth: 205 mm
- Height: 133 mm
- Width: 482 mm
- Product Weight: 4.40 kg
- Shipping Weight: 5.40 kg
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Klark Teknik
Model: SQ1G
Request more information from a dealer near you
close