Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Square One 8 Channel Dynamics Processor
Model: SQ1D
- Provide eight complete channels of either compression or gating, with push button selection
- LED status indication of operational mode on an individual channel basis
- Compressor section on each channel shall provide for adjustment of threshold, make-up gain, attack and release times and ratio
- RMS or Vintage emulation (peak) response and push button selection of soft or hard knee mode on each channel
- Gate section on each channel shall provide for adjustment of threshold, attack, hold and release times and range
Product Info
Tech Specs
Provide eight complete channels of either compression or gating, with push button selection.LED status indication of operational mode on an individual channel basis, compressor section on each channel shall provide for adjustment of threshold, make-up gain, attack and release times and ratio, RMS or Vintage emulation (peak) response and push button selection of soft or hard knee mode on each channel, gate section on each channel shall provide for adjustment of threshold, attack, hold and release times and range. Each channel shall have a six-segment input level meter and ten-segment attenuation depth meter, which will show the gain reduction being applied in both compression and gating modes. Each channel shall have a sidechain band-pass filter with rotary control knob for frequency control and shall be enabled by push button switch.
- Provide eight complete channels of either compression or gating, with push button selection
- LED status indication of operational mode on an individual channel basis
- Compressor section on each channel shall provide for adjustment of threshold, make-up gain, attack and release times and ratio
- RMS or Vintage emulation (peak) response and push button selection of soft or hard knee mode on each channel
- Gate section on each channel shall provide for adjustment of threshold, attack, hold and release times and range
- Each channel shall have a six-segment input level meter and ten-segment attenuation depth meter, which will show the gain reduction being applied in both compression and gating modes
- Each channel shall have a sidechain band-pass filter with rotary control knob for frequency control and shall be enabled by push button switch
- Band-pass filter shall have two different bandwidth settings, selectable by a push button switch
- There shall be provision for an external sidechain input selected by the external key switch with LED status indication
- Bypass switch shall set the signal path to unity gain on each channel and provide LED status
- Each channel shall have solo switch with LED status indication that sends sidechain signal to solo bus output connector
- Solo bus input connector shall allow multiple dynamics units to be chained together to form a common solo bus output
- Product Weight: 4.40 kg
- Shipping Weight: 5.40 kg
- Sampling Rate/Frequency: 20 kHz
- Sampling Rate/Frequency: 20 Hz
- Sampling Rate/Frequency: 0 Ghz
- Input Impedance: 5000 ohm
- Number of Audio Channels: 8
- Output Impedance: 50 ohm
- AC Voltage: 240 Volts
- Active Power: 35 Watt
- Depth: 203.20 mm
- Height: 133.35 mm
- Width: 482.60 mm
- Inputs: 8 (mic/line)
- Input Type: Analogue, electronically balanced, female XLRs (Pin 2 hot)
- Maximum Input Level: +22dBu
- Input Impedance: 5 kohms
- Common Mode Rejection: -80dB at 1kHz (typical), unity gain (0dB)
- ratio (CMRR): -100dB at 1kHz (typical), maximum gain (+40dB)
- Outputs: 16(rear panel)
- Operating Level: 0dB
- Maximum Level: +22 dBu
- Output Impedance: <50 ohms
- Signal drive capacity: <600 ohms
- Headphone Output: 1
- Rating: 750 mW (nominal 50ohm load)
- Audio: Front panel connectors
- Channel Input: Eight x AA series female XLRs (labelled "IN 1" to "IN 8")
- Isolated output C: Eight x AA series male XLRs (labelled "TX OUT 1" to "TX OUT 8")
- Electronic output A: Eight x AA series male XLRs (labelled "OUT A")
- Electronic output B: Eight x AA series male XLRs (labelled "OUT B")
- Power: 3-pin IEC
- Frequency Response: ±0.5dB (input to output), 20Hz to 20kHz
- Distortion: <0.02% at 1kHz, 0dBu at unity gain
- Dynamic Range: >122 (electronically balanced outputs) and >140 dB (transformer isolated outputs)
- Noise Floor Unity gain: <-100 dBu
- Mic EIN a5 +40dB gain: <-128 dBu
- High pass filter frequency: -3dB at 30Hz
- Filter slope: 12 dB/Octave
- Number of Inputs: 8
- Number of Outputs: 16
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Klark Teknik
Model: SQ1D
Request more information from a dealer near you
close