Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Analogue Graphic Equalizer with Earth Lift Switch Enables Signal and Chassis Grounds
Model: DN360
- Two x thirty 30mm oil damped precision faders graphically positioned at 1/3 octave ISO frequencies between 25Hz to 20kHz
- Proprietary circuit designs utilising "MELT" filters giving unbeatable performance
- Comprehensive standard specifications include electronically balanced inputs and LED overload indicators
- Earth lift switch enables signal and chassis grounds to be isolated eliminating ground-loop problems
- Useful low cut 18dB/octave filters preventing subsonic components from overloading speakers or amplifiers
Product Info
Tech Specs
Documents
Analogue graphic equalizer with earth lift switch enables signal and chassis grounds. Proprietary circuit designs utilising MELT filters giving unbeatable performance. But perhaps most important of all is the way they sound, it’s notoriously difficult to describe sound, but talk to anyone that prefers DN360s to any other graphic and they will use words like musical, smooth, responsive and great sounding. Primarily this is because we use proportional-Q filtering, where the ‘Q’ value of the frequency increases as the cut or boost increases. This provides a flowing response at low cut/boost values, but also accurate frequency control at higher values.
- Two x thirty 30mm oil damped precision faders graphically positioned at 1/3 octave ISO frequencies between 25Hz to 20kHz
- Proprietary circuit designs utilising "MELT" filters giving unbeatable performance
- Comprehensive standard specifications include electronically balanced inputs and LED overload indicators
- Earth lift switch enables signal and chassis grounds to be isolated eliminating ground-loop problems
- Useful low cut 18dB/octave filters preventing subsonic components from overloading speakers or amplifiers
- Equalisation by-pass allowing easy comparison between direct and equalised signals
- Equalizer Input Connector - XLR
- Equalizer Output Connector - XLR
- Equalizer Type - Graphic Equalizer
- Depth: 203.20 mm
- Depth: 205mm (8 inch)
- Frequency Response: 20Hz to 20kHz
- Gain: - infinitive to +6 dB
- Height: 133.35 mm
- Height:
133mm (5.25 inch)
- Impedance: (ohms)
- Impedance: 600 ohm
- Output: 3 pin XLR
- Power: IEC
- Width: 482.60 mm
- Width: 482mm (19 inch)
- Shipping Weight: 7 kg
- Tolerance: ±5 %
- Consumption: <15 VA
- SubSonic Filter: 18 at octave and 3 at 30Hz dB
- Source Impedance: <60 ohms
- Overload Indicator: +19 dBu
- Maximum Level: +22 dBu
- Maximum Boost/Cut: ±6/12 dB
- Distortion (THD+N): <0.01% at 1kHz,+4dBu
- Eq Out: ±0.5 dB
- Channel Seperation: >75 dB at 1KHz
- EQ In: (flat) ±0.5 dB
- Product Weight: 5.80 kg
- INPUT: 3 pin XLR
- Equivalent input noise (20Hz to 20kHz unweighted) EQ in (flat): <-90 dBu
- Filters centre frequencies: 2x30, to ISO266:1997 25Hz to 20kHz 1/3 octave
- Net Weight: 5.80 kg
Klark Teknik - Full Line Brochure.pdf
4559 kb
- Brochure
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Klark Teknik
Model: DN360
Request more information from a dealer near you
close