Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
120W 1-channel Class-D Power Amplifier
Model: T-1240D
- Class-D series digital power amplifier
- Switch power technology of APFC (Active power factor correction)
- 85% high efficient amplifier
- Low power consumption and less heat generation
- Power amplifier in 1U height
Product Info
Tech Specs
Related Products
Documents
One channel power amplifier is Class-D series. The output power of this series amplifier is 240W. The amplifiers are designed to be both tabletop and rack mount in 1U height. A shinning feature of this amplifier is that power electricity saving technology has been adopted. From one hand, switch power technology with APFC (Active power factor correction) had enhanced the efficiency up to 85%. From another hand, this amplifier is also preferable for much lower heat generation of less than 55? even at severe working conditions, thus this benefits are not only good for a green environment but also good for extension of life span. A line input by phoenix connectors. A RJ45 port for remote power control, volume control and status monitor. Remote power on/off could be done through the RJ45 port. The speaker output of 100V line without transformer. Volume control is supplied. The status indicators include signal, peak and protection. 190 to 240V AC wide voltage input suitable for global distribution. The 24V DC input for higher reliability, which is also designed of wide range protection within 20V to 25.6V, so as to protect battery during power shortage and protect circuit from high voltage damage. The cooling system to ensure the system internal temp kept under 55?. Extensive protection includes high temp, overload and short-circuit.
- Class-D series digital power amplifier
- Switch power technology of APFC (Active power factor correction)
- 85% high efficient amplifier
- Low power consumption and less heat generation
- Power amplifier in 1U height
- Line input by phoenix connector
- The speaker output of 100V without transformer
- The RJ45 port for remote power control, volume control and status monitor
- Remote power on/off could be done through the RJ45 port
- Volume control is supplied
- Built-in powered band pass filter for 80Hz to 16kHz signal
- Excellent and efficient cooling system
- The status indicator include signal, peak and protection
- Extensive high temp, overload and short-circuit protection
- 190 to 240V AC wide voltage input
- Amplifier Type - Power Amplifier
- ROHS Compliant - Yes
- Spec Sheet available - Yes
- Power Handling: 240 Watt
- Speaker Outputs: 100 V
- AC Voltage (Minimum): 240 Volts
- AC Voltage (Maximum): 190 Volts
- DC Voltage: 24 Volts
- Peak Power: 300 Watt
- Dimensions: 484 x 395 x 44 mm
- Certifications: CE, EMC, EN54-16, EN54-24, EN54-4, IEC/EN60065, CSA/UL, FCC, ETL, C-tick, CB, CCC, RoHS and ISO9001 & ISO14001
- Maximum Frequency Response (Bandwidth): 16 kHz
- Maximum Frequency Response (Bandwidth): 16000 Hz
- Minimum Frequency Response (Bandwidth): 80 Hz
- Minimum Frequency Response (Bandwidth): 0.08 kHz
- Mount Type: Rack Mount
- Number of Channels: 1
- Rack Units (Height): 1
- ROHS Compliant: Yes
- Signal to Noise Ratio: 85 dB
- Total Harmonic Distortion + Noise (THD+N): 0.50 %
- Product Weight: 4.50 kg
Power Amplifier
353 kb
- Data Sheet
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ITC Audio
Model: T-1240D
Request more information from a dealer near you
close