Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2 1/2-Way Professional Speaker System, 8 Ohms
Model: CAD 208
- Mounted in a precision-tuned polyamide housing
- Maximum SPL at 10% THD
- Power handling is 250 watts
- Available in black or white
Product Info
Tech Specs
Documents
Accessories
This professional 2 1/2-way speaker system serves to set up vertical arrays that project a wide wave-front across the entire audience area. Two 8" loudspeakers are mounted in a precision-tuned polyamide housing. Two 1" HF drivers are coupled to two CD horns with 100° horizontal and 15° vertical directivity. The tough polyamide housing is weather- and UV resistant. It comes in black or white, though other RAL colors are available on demand. The fully integrated rigging hardware is adjustable from 0° to 15° in 1.5° steps. The front grille is made of steel. The HK Audio FirNet Controller or HK AUDIO DSM 2060 Controller paired with VX2400 power amps serve to drive these speakers. Frequency response ranges from 75 Hz to 18 kHz (+/-3 dB), with 95 dB axial sensitivity (one unit) @ 1W/1 m under full-space conditions and 130 dB maximum SPL at 10% THD. Power handling is 250 watts RMS per unit; nominal impedance is 8 ohms. Optionally either two NL4s for the passive or NL8s for the triamped version, Barrierstrips, or PG glands with terminals inside.
- Mounted in a precision-tuned polyamide housing
- Maximum SPL at 10% THD
- Power handling is 250 watts
- Available in black or white
- Warranty - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 18 kHz
- Maximum Frequency Response (Bandwidth): 18000 Hz
- Minimum Frequency Response (Bandwidth): 100 Hz
- Minimum Frequency Response (Bandwidth): 0.10 kHz
- Construction: Polyamide metal
- Impedance: 8 ohm
- Power Handling: 250 Watt
- Sensitivity: 95 dB
- Depth: 370.30 mm
- Height: 230.80 mm
- Width: 570.80 mm
- Product Weight: 17.50 kg
- Warranty (Length/Type): 5 years
- Speaker Diametre (Driver): 203.20 mm
- Speaker Diametre 2: 25.40 mm
- SubSonic Filter: Crossover Controller
- Crossover Frequency: 1,8 KHz, 12 dB/ octave
- Rigging points: Integrated 3-point
- Active Power: 250 Watt
CAD 208
754 kb
- Data Sheet
Arakno 3D Adapter
3D-Adjustable Angle Adapter for CAD 208 and CAD 115 Sub Subwoofer
CADIS ceiling mount
Ceiling Mount for CAD 208 Mid/High Speaker System
CADIS stacking frame
Stacking Frame CADIS Speaker System
CADIS Wall mount
Wall mount with T-shaped Yoke and a Mounting Bracket
MA 1
Stainless Steel Double Bolt Connector for CAD 208 and CAD 115 Sub Subwoofer
ST 1
Skate/Carriage for T Bracket with Safety Eyelet
Sub Connector Set
CAD 115 Subwoofers to the Standard Rigging Frame Connector Set
Touring Case
Safely Transport Four or Eight CAD 208 Touring Case
3D-Adjustable Angle Adapter for CAD 208 and CAD 115 Sub Subwoofer
CADIS ceiling mount
Ceiling Mount for CAD 208 Mid/High Speaker System
CADIS stacking frame
Stacking Frame CADIS Speaker System
CADIS Wall mount
Wall mount with T-shaped Yoke and a Mounting Bracket
MA 1
Stainless Steel Double Bolt Connector for CAD 208 and CAD 115 Sub Subwoofer
ST 1
Skate/Carriage for T Bracket with Safety Eyelet
Sub Connector Set
CAD 115 Subwoofers to the Standard Rigging Frame Connector Set
Touring Case
Safely Transport Four or Eight CAD 208 Touring Case
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
HK Audio
Model: CAD 208
Request more information from a dealer near you
close