Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Audio Test Sets for Home Theater in Rack Mount Configuration
Model: TS1RMX
- Low Distortion Oscillator
- Frequency Counter
- DB Meter
- Inputs - Electronically balanced XLRs mounted on both front and rear panels
- Outputs - Electronically balanced XLRs mounted on both front and rear panels
Product Info
Tech Specs
Documents
Audio measurements can be made quickly and easily with Gold Line Audio Test Sets. The TS1RMX incorporates the three most commonly needed functions for calibration and alignment procedures in a standard rack mounted configuration with 3 pin XLR connectors. Included is a true sine wave oscillator allowing a full single range sweep from 20Hz to 20kHz, a dual use frequency counter and a wideband average responding AC voltmeter displayed as dB. The Low Distortion Oscillator: A current controlled, state-variable true sine wave oscillator incorporating a fast AGC circuit. Distortion components are typically 0.1% 2nd and 0.05% 3rd which are low order and not audible making the TS1 & TS2 useful in making listening tests where a function generator would generate undesirable, audible side effects. Full frequency sweeps can be made from 20Hz - 20kHz in a single range. These units have no amplitude changes over the entire frequency range. The Frequency Counter: The frequency counter is internally connected to the internal oscillator and displays the oscillator frequency until a signal is plugged into the input connector. It then displays the frequency of the input signal. This unique combination allows absolute precision in setting frequencies. The dB Meter: The dB meter is a wideband average responding AC voltmeter. The circuit output is converted to dB for display. Direct reading dB greatly simplifies alignment procedures.
- Low Distortion Oscillator
- Frequency Counter
- DB Meter
- Inputs - Electronically balanced XLRs mounted on both front and rear panels
- Outputs - Electronically balanced XLRs mounted on both front and rear panels
- Select between monitoring the Internal Oscillator at the Output
- Connector or an External Signal at the Input Connector
- Select between monitoring the front or rear panel connectors
- Tester Format - Other
- Spec Sheet available - Yes
- AC Voltage: 115,220 Volts
- Depth: 177.80 mm
- Height: 44.45 mm
- Width: 482.60 mm
- Product Weight: 1.36 kg
- Regulatory Compliance: CE,FCC
- Oscillator:
- Frequency Range: 10 - 27K Hz
- Accuracy: ±0.1Db From 20Hz - 20Khz
- Impedance: 63.2W. (Balanced)
- Adjustable Output Level: -60Dbv To +24Dbv Ref (0.775V)
- Maximum Output Level: +24Dbv @ 2Kw Or Greater, +22Dbm @ 600W
- Distortion: < 0.3 % THD
- Frequency Counter:
- Frequency Response: 1 - 99.99K Hz
- Input Impedance: >100 KW (Electronically Balanced)
- Input Level: -40 To +24 dBV
- dB Meter:
- Meter Range: -70 To +24 dBV
- Monitor Function: Allows Monitoring Of Either Input Or Output
- Display: 4 Digit Via 7 Segment Led
- Inputs Front Or Rear (Selectable): Xlr 3 Pin Receptacle. Electronically Balanced Pin
- Outputs Front And Rear: Xlr 3 Pin Plug. Electronically Balanced, Independe
- Case Material: Painted Aluminum.
Gold Line TS1RMX Spec Sheet.pdf
9 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Gold Line
Model: TS1RMX
Request more information from a dealer near you
close