Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Pink Noise Generator with Fixed and Calibrated Output Level of -26 dBV
Model: PN3C
Product Info
Tech Specs
Documents
The PN3C has a fixed and calibrated output level of -26 dBV. Its low output impedance allows it to drive both high and low input impedances without going out of regulation. It has a regulated and filtered power supply which can be supplied by an external AC adapter or a 9V battery. A power status Led indicates when lit that the battery is supplying adequate power. The PN3C turns on when a 1/4 inch phone plug is inserted in the output jack. There are no external controls.
- Signal Generator Type - Other
- Tester Format - Standalone Component (Box)
- Spec Sheet available - Yes
- Connector: Unbalanced 1/4" Jack, Mono
- Impedance:
32 ohms
- Pink Noise:
50.1mV (-26dB ± 0.1dB)
- Pink Noise:
20Hz - 20kHz
- Internal: 9V Battery
- External:
6 - 12V @200mA, 3.5mm, Tip Positive (+)
- Case Material: High impact ABS
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- DC Voltage: 12 Volts
- Depth: 38.10 mm
- Height: 101.60 mm
- Width: 63.50 mm
- Product Weight: 0.17 kg
- Regulatory Compliance: CE,FCC
Pink / White Noise Information Sheet
653 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Gold Line
Model: PN3C
Request more information from a dealer near you
close