Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
1/3 Octave Feedback Detector
Model: FD23
- When used with any equalizer, it is the fastest way to eliminate feedback.
- Uses the same filters as found in expensive 1/3 octave analyzers.
- A rugged hand held instrument with built-in microphone, powered by AA batteries or a 12Vdc supply.
Product Info
Tech Specs
Documents
The FD23 provides a quick inexpensive means of detecting which frequency is causing the feedback. Generally, feedback (ringing) is a self-sustaining and erroneous oscillation that occurs when sound arriving at a microphone is greater than the sound produced by the person or instrument using that microphone. Feedback is controlled through the use of a graphic or parametric equalizer, and these units are most effective when the sound engineer can quickly recognize the frequency at which feedback is occurring.
The FD23 is a rugged, inexpensive, hand-held instrument that can be used with either alkaline or nicad batteries. It can also be powered with a wall-wart providing 12Vdc @ 200mA. Nicad batteries can be recharged through the external power jack.
The FD23 operates using the same filter design that is found in Gold Line's spectrum analyzers. Ease of operation is through a single on/off/sensitivity control. If a frequency is ringing and the sensitivity is set accurately, the display of the FD23, which has LEDs for standard ISO third-octave frequencies from 80Hz to 12.5kHz, will light an LED representing the frequency that is ringing (within that frequency's tolerance). Most equalizers have adjustments (sliders) at the same frequencies and by moving the slider that matches the frequency indicator on the FD23 you will reduce the feedback.
The FD23 is a rugged, inexpensive, hand-held instrument that can be used with either alkaline or nicad batteries. It can also be powered with a wall-wart providing 12Vdc @ 200mA. Nicad batteries can be recharged through the external power jack.
The FD23 operates using the same filter design that is found in Gold Line's spectrum analyzers. Ease of operation is through a single on/off/sensitivity control. If a frequency is ringing and the sensitivity is set accurately, the display of the FD23, which has LEDs for standard ISO third-octave frequencies from 80Hz to 12.5kHz, will light an LED representing the frequency that is ringing (within that frequency's tolerance). Most equalizers have adjustments (sliders) at the same frequencies and by moving the slider that matches the frequency indicator on the FD23 you will reduce the feedback.
- When used with any equalizer, it is the fastest way to eliminate feedback.
- Uses the same filters as found in expensive 1/3 octave analyzers.
- A rugged hand held instrument with built-in microphone, powered by AA batteries or a 12Vdc supply.
- Microphone:
Omnidirectional electret condenser.
- MEASUREMENT FREQUENCIES (Hz):
80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k.
- Display:
Individual LED for each channel (23) measured.
- POWER REQUIREMENTS::
- Internal: Eight "AA" alkaline or nicad batteries.
- External:
12Vdc @ 200mA via 3.5mm jack.
- Approvals CE:
- Case Material:
High impact ABS.
- Current Draw: 0.20 Amps
- DC Voltage: 12 Volts
- Depth: 57.15 mm
- Height: 203.20 mm
- Width: 82.55 mm
- Product Weight: 0.34 kg
- Regulatory Compliance: CE, EN 55022 B - FCC Class B, EN 55024 B
Gold Line FD23 Manual.pdf
25 kb
- Instructions
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Gold Line
Model: FD23
Request more information from a dealer near you
close