Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Phantom-Powered Measurement Microphone System
Model: 7052PH
- Titanium diaphragm for stable sensitivity and frequency response
- Complete low-cost microphone system
- Phantom powered with 3-pin XLR connector - works with pro audio interfaces and portable digital recorders
- Wide, flat frequency response
- Low noise, wide dynamic range
Product Info
Tech Specs
Documents
The 7052PH is a phantom-powered measurement microphone system offering a cost-effective way to perform acoustic measurements.
Designed to work with 18-48 VDC phantom power, the 7052PH system includes the 7052E Type 1.5tm microphone capsule (mic) and the 4048 ACOtron™ preamp.
It works with pro audio interfaces (M-Audio, PreSonus, Lexicon, etc.), portable digital recorders, TEF20 and TEF25 analyzers that have phantom-powered 3-pin XLR mic inputs.
The rugged Titanium diaphragm of the 7052E mic provides excellent long-term stability and temperature handling -- better than mics that use Polyester™ diaphragms. The companion 4048 ACOtron™ preamp features low noise and a wide dynamic range.
Designed to work with 18-48 VDC phantom power, the 7052PH system includes the 7052E Type 1.5tm microphone capsule (mic) and the 4048 ACOtron™ preamp.
It works with pro audio interfaces (M-Audio, PreSonus, Lexicon, etc.), portable digital recorders, TEF20 and TEF25 analyzers that have phantom-powered 3-pin XLR mic inputs.
The rugged Titanium diaphragm of the 7052E mic provides excellent long-term stability and temperature handling -- better than mics that use Polyester™ diaphragms. The companion 4048 ACOtron™ preamp features low noise and a wide dynamic range.
- Titanium diaphragm for stable sensitivity and frequency response
- Complete low-cost microphone system
- Phantom powered with 3-pin XLR connector - works with pro audio interfaces and portable digital recorders
- Wide, flat frequency response
- Low noise, wide dynamic range
- Tester Format - Handheld
- Measurement Signal Type - Audio
- Spec Sheet available - Yes
- 7052E 1/2-inch Type 1.5tm electret free-field microphone (mic capsule):
- 7052E Type: IEC61094-4 Compliant
- 7052E Frequency response: <3 Hz to >25 kHz typical (see 7052E data sheet for chart)
- 7052E Sensitivity: 35 mV/Pa (-29 dBV/Pa) typical
- 7052E Dynamic range: <18 dBA noise floor to 150 dBSPL at 1% THD.
- 7052E Diaphragm material: Titanium
- 7052E TempCo: 0.01 dB/C°
- 7052E Mounting thread: 11.7 mm 60USN2
- 7052E Housing:
Non-magnetic
- 4048 ACOtron™ 1/2-inch phantom-powered preamp module:
- 4048 Frequency response: 4 Hz to 200 kHz (-2 dB) (with dummy mic DM2-22)
- 4048 Preamp loss with DM2-22 (similar to 7052H capsule): 1.05 dB typical
- 4048 Noise floor (with DM2-22): 1.9 uV typical, about 16-18 dBA with the 7052H microphone (depends on mic’s actual sensitivity)
- 4048 Input voltage for 1% THD: 5 Vrms (14 dBV) with 18-56 VDC phantom power
- 4048 Maximum change in sensitivity over operating voltage range: <0.1 dB
- 4048 Mic mounting thread: 11.7 mm 60UNS2
- 4048 Output connector: XLR 3-pin male
- 4048 Current draw: 3 to 4 mA
- 4048 Housing: Stainless steel (non-magnetic)
Phantom-Powered Measurement Microphone System
312 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Gold Line
Model: 7052PH
Request more information from a dealer near you
close