Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2-way Active Bi-amplified Stage Monitor
Series: MITUS
Model: MITUS 210MA
- 2-way bass reflex design with coaxial driver
- 1 x 10" B&C custom neodymium magnet coaxial speaker with 2.5" voice coil
- 1.4" exit titanium compression driver with 2.5" voice coil
- B&C custom 10" neodymium magnet woofer with 2.5 voice coil
- 600W RMS LF & 300W RMS HF class D built-in Amplifiers
Product Info
Tech Specs
Documents
The MITUS 210MA bi-amplified speaker feature 0.59" birch plywood construction, the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers and a rugged touring grade scratch resistant black paint finish protects the cabinet exterior. The MITUS 210MAis a two way coaxial design incorporating a 10" B&C custom neodymium magnet coaxial speaker with 2.5" voice coil and 1.4" exit titanium compression driver with 2.5" voice coil, a 10" neodymium magnet woofer with 2.5" voice coil, a class D built-in amplifiers 600W RMS to the LF and 300W RMS to the HF with switch mode power supply. The MITUS 210MA provides a DSP with A/D-D/A low noise converters with 8 selectable presets. The MITUS 210MA shall meet the following performance criteria is frequency response of 60Hz to 20kHz, maximum SPL of 132dB, nominal impedance 8 Ohms LF / 8 Ohms HF. The control panel provides XLR in/link, volume, preset, HP filter, GND lift switch. A standard 1.38" speaker stand socket allows the MITUS 210MAto be mounted on speaker stand.
- 2-way bass reflex design with coaxial driver
- 1 x 10" B&C custom neodymium magnet coaxial speaker with 2.5" voice coil
- 1.4" exit titanium compression driver with 2.5" voice coil
- B&C custom 10" neodymium magnet woofer with 2.5 voice coil
- 600W RMS LF & 300W RMS HF class D built-in Amplifiers
- 70° conical dispersion
- Input panel with XLR in/link, volume, preset, HP filter and GND lift connectors
- 132dB SPL capability
- 5/8" birch plywood enclosure
- 1.38" stand socket
- Completely manufactured in Italy
- Powered (Active) - Yes
- Depth: 402 mm
- Height: 290 mm
- Width: 574 mm
- Product Weight: 19 kg
- Shipping Weight: 21.10 kg
- Coverage Horizontal: 70
- Coverage Vertical: 70
- Maximum SPL (Sound Pressure Level): 134 dB
- Peak Power: 1200w LF, 600w HF
- Speaker Diametre (Driver): 254 mm
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 60 Hz
- Minimum Frequency Response (Bandwidth): 0.06 kHz
- Certifications: CE
- Construction: Birch plywood (Enclosure)
- Impedance: 22k ohm
- AC Power Requirement: 640 VA
- Dispersion: 70 degrees (conical)
- Power Output: 600W RMS LF/300W RMS HF
Mitus Operation Manual
8258 kb
- Instructions
Request Quote
Suggested Products
by
Yamaha Commercial Audio Systems, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
FBT
Model: MITUS 210MA
Request more information from a dealer near you
close