Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Matched pair of M30s (mic clips & ADP1 adapter included)
Series: Measurement Series
Model: M30mp
- Matched pair
- 30kHz flat frequency response
- Ideally suited for acoustical measurements including loudspeaker design and quality control, sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
- Improved version of the SMAARTMIC™ previously offered by EAW
- Omnidirectional polar pattern
Product Info
Tech Specs
Earthworks has become the accepted standard for affordable, reliable reference and measurement microphones. These microphones are accurate in the time domain and frequency response. Earthworks measurement microphones are optimized for clean, very fast impulse performance to provide accurate wideband response. They have virtually no handling noise and are remarkably stable with respect to temperature and atmospheric conditions. Our M Series measurement microphones are used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others. All models are available in matched pairs. The M30 is the standard for field and laboratory acoustic measurements. It features a very uniform frequency response and excellent impulse response.
- Matched pair
- 30kHz flat frequency response
- Ideally suited for acoustical measurements including loudspeaker design and quality control, sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
- Improved version of the SMAARTMIC™ previously offered by EAW
- Omnidirectional polar pattern
- Flat frequency response, fast impulse response and exceptional polar characteristics
- Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
- Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
- Requires 48V Phantom Power
- Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
- Electronic Calibration File available
- Operating Temp Range: -10 deg C to +40 deg C ( 14 deg. F to 104 deg. F)
- Storage Temp Range: -20 deg C to +50 deg C ( -4 deg. F to 122 deg. F)
- Made in USA
- Microphone Connectivity - Wired
- Microphone Type - Condenser
- Microphone Type - Electret Condenser
- Warranty - Yes
- Polar/Pickup Pattern - Omnidirectional
- Depth: 22 mm
- Height: 229 mm
- Noise: 20 dB
- Minimum Frequency Response (Bandwidth): 5 Hz
- Maximum Frequency Response (Bandwidth): 30 kHz
- Signal to Noise Ratio: dB
- Operating Temperature (Maximum): 40 C
- Operating Temperature (Minimum): -10 C
- Maximum Frequency Response (Bandwidth): 30000 Hz
- Minimum Frequency Response (Bandwidth): 0.01 kHz
- Impedance: 100 ohm
- Maximum SPL (Sound Pressure Level): 142 dB
- Sensitivity: -30.50 dBV
- Wireless: No
- Product Weight: 0.23 kg
- Colour: Stainless
- Noise: 22 dBA
- Warranty (Length/Type): 15 Years
- Mic Maximum Frequency Response: 30 kHz
- Mic Maximum Frequency Response: 30000 Hz
- Mic Minimum Frequency Response: 30 Hz
- Mic Minimum Frequency Response: 0.03 kHz
- Number of Mics Supplied: 2
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Earthworks, Inc.
Model: M30mp
Request more information from a dealer near you
close