Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Product Info
Tech Specs
Related Products
The 2 RU two channel lightweight D6 amplifier delivers medium power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D6 contains configurations for d&b loudspeakers and a linear mode; exceptions are 2-Way Active, V-Series and B2-SUB. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D6 incorporates a digital rotary encoder and a LCD display to configure the amplifier. The D6 incorporates Class D amplifiers utilizing a switch mode power supply with active Power Factor Correction (PFC), suitable for mains voltages 100 V/120 V/200 V/ 230 V, 50 - 60 Hz and maintains a stable and increased output when used with weak or unstable mains supplies. It is supplied with two NL4 loudspeaker output connectors. RJ 45 connectors enable access to the Remote network via CAN-Bus. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively.
- Amplifier Type - Power Amplifier
- Warranty - Yes
- ROHS Compliant - Yes
- Rackmountable - Yes
- Impedance: 4 ohm
- Number of Channels: 2
- Number of Inputs: 2
- Number of Outputs: 2
- Rack Units (Height): 2
- Depth: 353 mm
- Width: 482.60 mm
- Product Weight: 8 kg
- Colour: Black
- Signal to Noise Ratio: 110 dB
- Total Harmonic Distortion + Noise (THD+N): 0.10 %
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Operating Temperature (Maximum): 40 C
- Operating Temperature (Minimum): 0 C
- Maximum Frequency Response (Bandwidth): 24 kHz
- Maximum Frequency Response (Bandwidth): 24000 Hz
- Minimum Frequency Response (Bandwidth): 0.03 kHz
- Minimum Frequency Response (Bandwidth): 28 Hz
- Certifications: CE, K-Mark, SABS, C-Tick, IRAM, PSE, CCC, cCSAus, GOST R
- Communication Ports: CAN
- Energy Star rated: No
- Enviro-Packaging Policy: No
- EPEAT Evaluation: No
- Integral Tuner: No
- ISO 14001 Certification: No
- Low Voltage Control: No
- Mount Type: Rack
- Number of Watts Per Channel: 600 Watt
- Rackmountable: Yes
- ROHS Compliant: Yes
- Transformer Option: No
- Power Factor: 99 %
- Standby Power: 4 Watt
- Height: 88.90 mm
- Regulatory Compliance: RoHS, WEEE
- Warranty (Length/Type): 5 years
10A
- 2-way high performance point source loudspeaker
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
d&b audiotechnik Corporation
Model: D6
Request more information from a dealer near you
close