Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Solid-state Two-channel MA-12000i Power Amplifier
Series: Macro-Tech i Series
Model: MA-12000i
- The Crown® Macro-Tech® i Series continues the Macro-Tech legacy of unparalleled sonic accuracy and detail, putting sound quality above all else
- Patented, cutting-edge Class-I circuitry gets more power out of an amplifier with less waste
- Rugged construction ensures that all Macro-Techs are built to withstand years of abuse on the road
- Global Power Supply — designed to deliver maximum power no matter what country you work in
- Built-in load, line voltage, input and output monitoring
Product Info
Tech Specs
Documents
The Crown® Macro-Tech® i Series offers amazing power, light weight and ease of use for touring sound applications. The series includes onboard analog signal processing and a built-in network connection.
- The Crown® Macro-Tech® i Series continues the Macro-Tech legacy of unparalleled sonic accuracy and detail, putting sound quality above all else
- Patented, cutting-edge Class-I circuitry gets more power out of an amplifier with less waste
- Rugged construction ensures that all Macro-Techs are built to withstand years of abuse on the road
- Global Power Supply — designed to deliver maximum power no matter what country you work in
- Built-in load, line voltage, input and output monitoring
- Standard Ethernet networking via System Architect® lets system operators monitor and control the amplifier from any location
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- Frequency Response (at 1 watt, 20Hz - 20 kHz inot 8 ohms): ± 0.25 dB
- Total Harmonic Distortion (THD) Plus Noise at full rated power: < 0.35%, 20 hz to 20 kHz
- Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to -30 dB: < 0.35%
- Damping Factor (20 Hz to 100 Hz at 8 ohms): > 5000
- Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB
- Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 55 dB typically > 70dB
- DC Output Offset (Shorted Input): > 55 dB typically >70dB
- Input Impedance (nominal) balanced: 10 kilohms
- Input Impedance (nominal) unbalanced: 5 kilohms
- Maximum Input Level: +20 dBu typical
- Load Impedance (Note: Safe with all types of loads)Stereo: 1/2/4/8/16 ohms
- Load Impedance (Note: Safe with all types of loads)Bridge Mono: 2/4/8 ohms
- Input Sensitivity (referenced to 8 ohm rated output): 1.4V, 32dB gain, and 26dB gain
- Voltage Gain (referenced to 8 ohm rated output): 39.3dB to 24.5dB
- Required AC Mains: Universal AC input, 100-240VAC, 50/60Hz (±10%). Maximum AC mains voltage 264VAC.
- AC Line Connector: Five cordsets supplied with amplifier
- Cooling: Dual-zone, microprocessor controlled, continuously variable speed fans, front-to-vack airflow
- Front Panel: Cast aluminum with integrated handles
- Signal to Noise Ratio: 108 dB
- Total Harmonic Distortion + Noise (THD+N): 0.10 %
- Depth: 411.48 mm
- Height: 88.90 mm
- Width: 482.60 mm
- Product Weight: 12.70 kg
- Shipping Weight: 16.30 kg
Datasheet for Solid-state Two-channel Power Amplifier
73628 kb
- Other
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Crown International, Inc.
Model: MA-12000i
Request more information from a dealer near you
close