Saros 6.5 in. 2-Way All Weather Surface Mount Indoor/Outdoor Speaker, White Textured, Single
Model: SAROS SMT6T-AW-W-T-EACH
Part #: 6511863
- High-performance 2-way surface mount speaker
- Designed for high reliability in both indoor and outdoor applications
- 6.5 in. (165 mm) Injection-Molded Polypropylene (IMPP) woofer
- 1 in. (25 mm) ceramic-coated aluminum tweeter
- IPX6 rated for water and weatherized construction
Saros® speakers by Crestron deliver professional grade performance and flexible installation for demanding commercial or residential applications.
The SAROS SMT6T-AW-W-T-EACH is a surface-mountable, all-weather, 2-way speaker featuring a 6 in. (165 mm) IMPP woofer for deep, defined low end. A 1 in. (25 mm) ceramic-coated aluminum tweeter provides crisp highs with consistent coverage across a wide listening area. A built-in 60 Watt multi-tap transformer allows for use with 70 or 100 Volt distributed speaker systems. The power handling is an impressive 110 W (program) with a wide frequency response from 65 Hz to 20 kHz (±3 dB).
The SAROS SMT6T-AW-W-T-EACH features a clean and contoured enclosure with weatherized construction. It can be mounted to most solid flat surfaces using the included brackets and painted to blend with the surrounding architecture. The speaker comes with a rectangular grille, and a preconstruction mounting kit (SPKA-PMK-SMT6T-W-T) is available as an accessory. The preconstruction mounting kit can be purchased prior to receiving the speaker to prepare an installation for speaker and cabling positioning. A safety tether kit (SPKA-ST-15) can also be purchased separately and installed to make the speaker compliant with the UL 2239 standard.
- High-performance 2-way surface mount speaker
- Designed for high reliability in both indoor and outdoor applications
- 6.5 in. (165 mm) Injection-Molded Polypropylene (IMPP) woofer
- 1 in. (25 mm) ceramic-coated aluminum tweeter
- IPX6 rated for water and weatherized construction
- UL 1480A safety rated speaker for commercial and professional use
- 110 W Program, 200 W Peak (8ohms)
- Built-in 60 Watt 70/100V multi-tap transformer
- 65 Hz to 20 kHz (±3 dB) frequency response
- 8ohms nominal impedance
- Paintable to blend with surroundings
- Mounting mechanism allows for pan or tilt
- Suitable for both Residential and Commercial applications
- Loudspeaker Mount Type - Surface Wall
- Warranty - Yes
- Spec Sheet available - Yes
- Depth: 207.52 mm
- Enclosure: PP+Fiber loaded, fire retardant, UL rated
- Frequency Range: 45 Hz-20 kHz +/-10 dB
- Height: 332.99 mm
- Impedance: 8 ohm
- Sensitivity: 92 dB
- Width: 199.14 mm
- Baffle: PP+Fiber loaded, fire retardant, UL rated
- Transformer Taps: 7.5 W, 15 W, 30 W, 60 W
- Regulatory Compliance: UL
- Humidity: 10% to 95% RH (non-condensing)
- Tweeter: 1 in. ceramic coated aluminum
- Maximum Wire Size: 12 AWG
- Grille: Powder-coated perforated aluminum
- Crossover Point: 2 kHz
- Transformer Tap: Front mounted, screwdriver-adjustable, used to select 70/100V taps or 8 ohms
- Peak Power: 200 Watt
- Product Weight: 5.04 kg
- Mounting: Die Cast AL wall mount to fit 1 gang box, pole clamp capable, safety tether, adjustable yoke.
- INPUT: (1) 4-pin 5 mm detachable terminal block, Speaker input with parallel pass-through, 12 AWG maximum
- Active Power: 110 Watt
- Colour: White
- Minimum Frequency Response (Bandwidth): 65 Hz
- Minimum Frequency Response (Bandwidth): 0.07 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Speaker Diametre (Driver): 165.10 mm
- Operating Temperature (Maximum): 80 C
- Operating Temperature (Minimum): -15.50 C
- Splash Resistance: IPX6
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au