Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Beamforming Microphone Array Ceiling Tile with built-in AEC
Model: BMA CTH
- 24 MICROPHONES
- Number of Beams: Two patterns, either 5 or 6 beams
Product Info
Tech Specs
Documents
The BMA CTH Beamforming Microphone Array Ceiling Tile with built-in AEC provides the same impeccable room coverage as the BMA CT using adaptive steering (think of it as smart switching).
- 24 MICROPHONES
- Number of Beams: Two patterns, either 5 or 6 beams
- Polar/Pickup Pattern - Other
- Microphone Type - Boundary
- Spec Sheet available - Yes
- LED:
4 LED indicators on one end of unit:
Mute/Un-mute configuration with 8 color options, two blink patterns and warning indications - Amplifier Output:
Type: 5.08mm Black Header, Male, Phoenix type Euroblock
Audio: 2 channels
Output Power: 2x10W Max, 8ohm load*
Frequency Response: 20Hz – 22kHz @ +10dBu, +/0.5dB
THD + Noise: 20Hz – 22kHz @ +10dBu, 1W, < 0.2%
Dynamic Range: 20Hz – 22kHz @ +20dB, > 102dB,with 20kHz digital low pass filter
Crosstalk: Channel to Channel, stimulus at +20dBu receptor 10W output 8ohm load, 20Hz – 22kHz, < -60dB - Configuration & Administration Software:
CONSOLE® AI Software - Mounting:
Ceiling mount (24" or 600mm drop-ceiling grid) - Minimum Frequency Response (Bandwidth): 150 Hz
- Minimum Frequency Response (Bandwidth): 0.15 kHz
- Maximum Frequency Response (Bandwidth): 16000 Hz
- Maximum Frequency Response (Bandwidth): 16 kHz
- Operating Temperature (Maximum): 40 C
- Operating Temperature (Minimum): -10 C
- POWER & THERMAL:
Power Type: PoE
Port Type: RJ-45
Power Source: PoE Injector or equivalent
PoE: IEEE 802.3at compliant devices providing 56V and 640 mA (36 W).
P-Link In - Mode B
PoE In - Mode A and Mode B
*BMA CTH requires its own PoE (IEEE 802.3 at compliant) if 2x10W speakers are driven
Power Consumption:
100-240VAC, 50/60Hz
9.1 Watt typical without speaker amp
38W at max power 1kHz (2 x 10W)
Thermal: 130 BTU/Hr at max power - 24 MICROPHONES:
Number of Beams: Two patterns, either 5 or 6 beams
Polar Pattern: Custom
Frequency Response: 150Hz – 16kHz, +/- 3dB
Dynamic Range: 150Hz – 16kHz, > 70dB - PEQ:
Automatic Level Control (ALC) on/off
Gain adjust
Mute on/off
Auto gate/Manual gate - P-LINK PERIPHERAL BUS:
Ports labeled as "Expander" on Huddle Chassis, and "P-Link" on BMA CTH
P-Link In & Out: Proprietary Network
Ports Type: RJ-45
Cable: RJ45 Cat5e, Cat6, Expandable
Distance: Up to 200 ft. - POWER SELECTION SWITCH:
Type: Slide Switch
Slide toward P-Link to power device by P-Link
Slide toward PoE to power device by PoE Injector - Configuration:
Beam enable/disable
Acoustic Echo Cancellation (AEC) on/off
Noise Cancellation (NC) on/off
Filters:
All Pass
Low Pass
High Pass
Notch
COLLABORATE Versa Pro CT v1.5 201910301.pdf
3472206 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ClearOne
Model: BMA CTH
Request more information from a dealer near you
close