Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Base Station for HME DX121 Wireless System
Model: BS121
- RoHS Compliant
- Headset connector connectivity can be connected to most hardwired intercom headset jacks
- Four-wire connectivity interfaces to four-wire/matrix intercoms and radio based systems
- Assignable relay closure for advanced functionality
- Built-in battery charger
Product Info
Tech Specs
Documents
Headset connector connectivity can be connected to most hardwired intercom headset jacks for instant wirelesscommunication. Four-wire connectivity interfaces to four-wire/matrix intercoms and radio based communication systems. Assignable relay closure for advanced functionality. Built-in battery charger one-port battery charger charges a remote communicator battery in under three hours. Digital frequency-hopping, spread spectrum (FHSS) encryption technology ensures confidential communication. Approved for worldwide use. Assignable relay closure provides advanced functionality when used with matrix intercoms or radio based communication systems. Expandable compatible with the entire HME DX 200 and 100 series of digital wireless intercom products. Four-Wire I/O Connection 600 ? balanced, level adjustable. Headset I/O Connection 200 ?, level adjustable for interfacing to a Dynamic MIC headset connector.
- RoHS Compliant
- Headset connector connectivity can be connected to most hardwired intercom headset jacks
- Four-wire connectivity interfaces to four-wire/matrix intercoms and radio based systems
- Assignable relay closure for advanced functionality
- Built-in battery charger
- Charges a remote communicator battery in under three hours
- Approved for worldwide use
- Expandable compatible with the entire HME DX 200 and 100 series
- Dynamic MIC headset connector
- Wireless - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 55 C
- Operating Temperature (Minimum): -15.56 C
- Maximum Frequency Response (Bandwidth): 3.50 kHz
- Maximum Frequency Response (Bandwidth): 3500 Hz
- Minimum Frequency Response (Bandwidth): 200 Hz
- Minimum Frequency Response (Bandwidth): 0.20 kHz
- Wireless: Yes
- Product Weight: 0.54 kg
- Power Requirements: 100–240VAC, 50-60Hz or 12-14VDC
- 4-Wire I/O: 600 ohms balanced, level adjustment
- Headset I/O: 200 ohms balanced, level adjustment
- Antenna Type: External, dual diversity half-wave dipole
- System Distortion: <2 %
- Communication Security: 64-bit encryption dual slot diversity
- Transmission Modes: Continuous (Latched) or Push-to-Talk (PTT)
- Transmitter Type: Frequency-Hopping, Spread Spectrum (FHSS)
- Transmit Power: 100 mW (Burst)
- Modulation Type: Gaussian filtered FSK, TDM
- Transmitter Frequency Stability: 13 ppm
- Receiver Type: Frequency-Hopping, Spread Spectrum (FHSS)
- RF Sensitivity: <-90dBm w 10-3 BER
- Receiver Frequency Stability: 13 ppm
- Distortion: <2 %
Base Station
230 kb
- Data Sheet
Base Station
2330 kb
- Brochure
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Clear-Com
Model: BS121
Request more information from a dealer near you
close