Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Fiber Interface
Model: PRS-FIN
- Redundant network connection
- Indicators for power and fault status
- Two supervised control inputs (not PRS?FINNA)
- Can use a local power supply
Product Info
Tech Specs
Documents
Most of the Praesideo system units have plastic fiber optic interfaces. Plastic fiber is used to interconnect nodes which are less than 50 meters apart.For distances of more than 50 meters, glass fiber optic cable is used. A fiber interface converts from plastic to glass fiber, and vice versa. The fiber interfaces have a power supply input to provide power to remote
network sections, and two control inputs. The control inputs can pass on supervision information about the power supply connected to the fiber interface.
- Redundant network connection
- Indicators for power and fault status
- Two supervised control inputs (not PRS?FINNA)
- Can use a local power supply
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 55 C
- Operating Temperature (Minimum): -5 C
- Depth: 80 mm
- Height: 27 mm
- Width: 243 mm
- Product Weight: 0.68 kg
- Colour: Charcoal
- Power Consumption: 4.6 W (DC)
- Voltage: 24 to 56 VDC 48 VDC nominal
- Current: 2.5 A maximum (5 A peak <2 s)
- Control: inputs 2 x
- Connector: Screw terminals
- Operation: Closing contact (with supervision)
- Storage Temperature: -20 to +70 ºC (-4 ºF to +158 ºF)
- Humidity: 15 to 90 %
- Air Pressure: 600 to 1100 hPa
Fiber Interface
270 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Bosch Conferencing and Public Address Systems
Model: PRS-FIN
Request more information from a dealer near you
close