Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Call Station Remote
Model: PRS-CSR
- Connects to call station interface via CAT-5 cable
- Up to 1 km from Praesideo optical network
- Uses standard Praesideo keypads for extension
- Built-in limiter
- Powered via CAT-5 and/or local power supply
Product Info
Tech Specs
Documents
The PRS-CSR is a call station with the same
functionality as the basic call station, LBB 4430/00, but it uses CAT-5 cable for its connection to the Praesideo network. It connects, one-to-one, to the call station interface, PRS-CSI, which is part of the Praesideo optical network. The CAT-5 cable, carrying digital audio and control data, can be as long as 1 km. The length of the CAT-5 cable is not a part of the
Praesideo optical network length. This considerably increases the overall possible length of the optical network.
The PRS-CSR can be extended with up to 16 keypads (LBB 4432/00 or LBB 4434/00), each with eight programmable keys. Extension with a numeric keypad (PRS-CSNKP) is also possible.
Functions
The call station has a cardioid, supervised microphone on a gooseneck stem with good speech intelligibility. A limiter and a speech filter improve intelligibility and prevent clipping of the audio. It has a volume control for the monitoring speaker and the headset. When it plays a chime or a pre-recorded message, the call station activates its speaker. When a headset is connected, it replaces the microphone and speaker.
The remote call station connects via a CAT-5 cable to an PRS-CSI unit, which interfaces it to the Praesideo optical network. The call station gets its power from the interface unit via the CAT-5 cable, but is also equipped with a local power supply connection for extreme cases with a very long cable and many keypads.
Up to 16 call station keypads can connect to the station via a serial communication link. The call station provides the power for the keypads. Up to 224 priorities can be assigned to the call station. All configuration can be done via the Praesideo network controller.
The remote call station is fully supervised and supports fail-safe operation. Even if the Praesideo network controller fails, the call station is still able to put through emergency calls.
Controls and indicators
Three status LEDs
Configurable PTT-key
Volume control for loudspeaker/headset
Interconnections
RJ45 connector for CAT-5 connection
Serial data and power supply interface for call station keypads
Kycon type (lockable) connector for power and two control inputs
3.5 mm jack for headset/headphone
The PRS-CSR can be extended with up to 16 keypads (LBB 4432/00 or LBB 4434/00), each with eight programmable keys. Extension with a numeric keypad (PRS-CSNKP) is also possible.
Functions
The call station has a cardioid, supervised microphone on a gooseneck stem with good speech intelligibility. A limiter and a speech filter improve intelligibility and prevent clipping of the audio. It has a volume control for the monitoring speaker and the headset. When it plays a chime or a pre-recorded message, the call station activates its speaker. When a headset is connected, it replaces the microphone and speaker.
The remote call station connects via a CAT-5 cable to an PRS-CSI unit, which interfaces it to the Praesideo optical network. The call station gets its power from the interface unit via the CAT-5 cable, but is also equipped with a local power supply connection for extreme cases with a very long cable and many keypads.
Up to 16 call station keypads can connect to the station via a serial communication link. The call station provides the power for the keypads. Up to 224 priorities can be assigned to the call station. All configuration can be done via the Praesideo network controller.
The remote call station is fully supervised and supports fail-safe operation. Even if the Praesideo network controller fails, the call station is still able to put through emergency calls.
Controls and indicators
Three status LEDs
Configurable PTT-key
Volume control for loudspeaker/headset
Interconnections
RJ45 connector for CAT-5 connection
Serial data and power supply interface for call station keypads
Kycon type (lockable) connector for power and two control inputs
3.5 mm jack for headset/headphone
- Connects to call station interface via CAT-5 cable
- Up to 1 km from Praesideo optical network
- Uses standard Praesideo keypads for extension
- Built-in limiter
- Powered via CAT-5 and/or local power supply
- Microphone Connectivity - Wireless
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 45 C
- Operating Temperature (Minimum): -5 C
- Mic Maximum Frequency Response: 14 kHz
- Mic Maximum Frequency Response: 14000 Hz
- Mic Minimum Frequency Response: 340 Hz
- Mic Minimum Frequency Response: 0.34 kHz
- Depth: 200 mm
- Height: 90 mm
- Width: 160 mm
- Product Weight: 1 kg
- Colour: Charcoal
- External Power Supply: 18 to 56 VDC
- Power Consumption: 3.3 W at 48 V without keypads
- Length of goose neck: 380 mm (15 in)
- Mounting: Standalone
- Storage Temperature: -20 to +70 ºC (-4 ºF to +158 ºF)
- Humidity: 15 to 90 %
- Air Pressure: 600 to 1100 hPa
Call Station Remote
254 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Bosch Conferencing and Public Address Systems
Model: PRS-CSR
Request more information from a dealer near you
close