Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
IP Audio Interface
Model: PRS-1AIP1
- All-in-one solution for audio transport on IP networks
- Supervised control inputs and outputs
- Supports re-broadcasting
- Configurable audio delay on the output for loudspeaker alignment
- Easy to install and configure via standard web browser
Product Info
Tech Specs
Documents
The PRS-1AIP1 is a universal, IP based audio device
supporting VoIP and Audio over IP applications. It is an
ideal solution for bridging audio and contact closures over
long distance LAN and WAN networks, e.g. in shopping
malls, tunnels, in and between railway stations. It extends
and interfaces to Praesideo and non-network based
traditional public address systems without the need for a
PC during operation.
The unit has analog audio inputs and outputs for easy interfacing with optional pilot-tone supervision for emergency sound purposes. One audio input can be switched to microphone sensitivity with built-in microphone supervision. Also, the control inputs offer cable and connection supervision.
Control inputs and outputs can be used to set up an audio connection to start a remote call, but also to pass remote fault events to the system controller.
The unit has analog audio inputs and outputs for easy interfacing with optional pilot-tone supervision for emergency sound purposes. One audio input can be switched to microphone sensitivity with built-in microphone supervision. Also, the control inputs offer cable and connection supervision.
Control inputs and outputs can be used to set up an audio connection to start a remote call, but also to pass remote fault events to the system controller.
- All-in-one solution for audio transport on IP networks
- Supervised control inputs and outputs
- Supports re-broadcasting
- Configurable audio delay on the output for loudspeaker alignment
- Easy to install and configure via standard web browser
- EN 60849 compliant IP solution
- Spec Sheet available - Yes
- External Power Supply: 1 18 to 56 VDC
- External Power Supply: 2 18 to 56 VDC
- Power Consumption: 8 W max
- Sensitivity: -48.5 to -26 dBV
- Impedance: 1360 ohm
- Frequency Response: 100 Hz to 15 kHz
- S/N: >60 dB
- Supervision detection Electret:
0.4 - 5 mA
Dynamic: 120 - 1300 ohm - Sensitivity: -16.5 to +6 dBV
- Impedance: 22 kohm
- Frequency Response: 20 Hz to 15 kHz
- S/N: >70 dB
- Pilot tone detection level(input 2 only): -30 dBV
- Line Outputs:
- Level: 6 dBV max
- Pilot tone level (output 2 only): -20 dBV (20 kHz)
- MPEG 1-layer 3:
(MP3) 32, 44.1 and 48 kHz sample rate
Encoding up to 192 kbps VBR
Decoding up to 320 kbps (stereo) - MPEG 1-layer 2: 16, 22.05 and 24 kHz sample rate
- G.711: uLaw, aLaw at 8, 24 or 32 kHz sample rate
- PCM: 16-bit at 8, 24 or 32 kHz sample rate
- Connectors: Removable screw terminals
- Operation: Closing contact (with supervision)
- Control / fault outputs: 8 x / 1 x
- Connectors: Removable screw terminals
- Operation: Make contact (SPST, voltage free)
- Rating: 24 V, 0.5 A
- Connector: Dual RJ45, DTE-pinout
- Operating Temperature (Maximum): 50 C
- Operating Temperature (Minimum): -5 C
- Depth: 125 mm
- Height: 216 mm
- Width: 38 mm
- Product Weight: 0.70 kg
- Colour: Silver with Charcoal
PRS-1AIP1 IP Audio Interface
755 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Bosch Conferencing and Public Address Systems
Model: PRS-1AIP1
Request more information from a dealer near you
close